A drilling-punching-hole protection integrated hydraulic caving technology for broken soft and low-permeability coal seams

Authors

YAO Ningping, CCTEG Xi’an Research Institute (Group) Co., Ltd., Xi’an 710077, ChinaFollow
HAO Shijun, CCTEG Xi’an Research Institute (Group) Co., Ltd., Xi’an 710077, China
ZHANG Jinbao, CCTEG Xi’an Research Institute (Group) Co., Ltd., Xi’an 710077, ChinaFollow
WEI Hongchao, CCTEG Xi’an Research Institute (Group) Co., Ltd., Xi’an 710077, China
NIE Chao, CCTEG Xi’an Research Institute (Group) Co., Ltd., Xi’an 710077, China

Abstract

Objective and Method For broken soft and low-permeability coal seams, gas drainage achieved through permeability enhancement and pressure relief by cross-seam hydraulic caving in coal seam floor faces problems including serious borehole collapse in the drilled coal seam intervals, low construction efficiency, and poor gas drainage performance. To address these problems, this study proposed a high-efficiency drilling-punching-hole protection integrated gas drainage technology, which enabled hydraulic caving, permeability enhancement, and pressure relief. Furthermore, this study developed a drilling-punching-hole protection integrated caving device. Through laboratory experiments conducted under pressure conversion and central channels equipped with controllable opening/closing mechanisms, this study selected the optimal scheme for central channel sealing and determined the optimal hydraulic parameters of the hydraulic caving device. Using large through-hole drill rods and openable/closable drill bits in combination, this study compared the construction efficiency and gas drainage performance of the integrated technology with those of the traditional drilling-punching technique. Results and Conclusions The drilling-punching-hole protection integrated caving device allowed for the shift from low-pressure drilling to high-pressure caving under a pressure of 3 MPa. A drilling flow rate of ≥ 100 L/min and a flow rate for high-pressure caving of ≥150 L/min could be guaranteed when the flow channel diameter was ≥ 4 mm and the nozzle diameter for caving was ≥ 3.5 mm. Compared to the original hydraulic punching and caving technology, the drilling-punching-hole protection integrated technology increased the average placing rate of screen pipe from 87.1% to 97.5%. Most specifically, this technology increased the average hole protection rate in the drilled coal seam intervals from 55.9% to 98.2%. After gas drainage for 30 days, the daily pure gas flow from a borehole and that from an equivalent 100-m-long drilled coal seam interval increased to 3.8 times and 4.5 times, respectively, and the cumulative pure gas flow increased to 1.69 times and 2.01 times, respectively, compared to the original technology. In addition, the new technology requires only one round of drilling throughout the whole construction process. Compared to the original technology, the integrated technology yielded coal punching efficiency of up to 8.35 times and doubled overall operational efficiency. The drilling-punching-hole protection integrated technology allows for integrated construction of the full process consisting of drilling, hydraulic punching, and hole protection. This technology addresses the challenges of existing punching and caving construction for broken soft and low-permeability coal seams, including low efficiency, cumbersome operation process, and the phenomenon that the screen pipe cannot be placed without lifting drilling tools after caving. Therefore, the proposed technology improve gas drainage performance through hydraulic caving, permeability enhancement, and pressure relief.

Keywords

broken soft coal seam, integration of drilling, punching, and protection, gas drainage, hydraulic caving, hole protection using screen pipe while drilling

DOI

10.12363/issn.1001-1986.25.04.0253

Recommended Citation

YAO Ningping, HAO Shijun, ZHANG Jinbao, et al. (2026) "A drilling-punching-hole protection integrated hydraulic caving technology for broken soft and low-permeability coal seams," Coal Geology & Exploration: Vol. 54: Iss. 2, Article 22.
DOI: 10.12363/issn.1001-1986.25.04.0253
Available at: https://cge.researchcommons.org/journal/vol54/iss2/22

Reference

[1] 王恩元，张国锐，张超林，等. 我国煤与瓦斯突出防治理论技术研究进展与展望[J]. 煤炭学报，2022，47(1)：297−322.

WANG Enyuan，ZHANG Guorui，ZHANG Chaolin，et al. Research progress and prospect on theory and technology for coal and gas outburst control and protection in China[J]. Journal of China Coal Society，2022，47(1)：297−322.

[2] ZOU Quanle，LI Quangui，LIU Ting，et al. Peak strength property of the pre–cracked similar material：Implications for the application of hydraulic slotting in ECBM[J]. Journal of Natural Gas Science and Engineering，2017，37：106−115.

[3] 卢义玉，李瑞，鲜学福，等. 地面定向井+水力割缝卸压方法高效开发深部煤层气探讨[J]. 煤炭学报，2021，46(3)：876−884.

LU Yiyu，LI Rui，XIAN Xuefu，et al. Discussion on the efficient exploitation method of deep coalbed methane with pressure relief by ground directional well+hydraulic slotting[J]. Journal of China Coal Society，2021，46(3)：876−884.

[4] ZHANG Rong，CHENG Yuanping，YUAN Liang，et al. Enhancement of gas drainage efficiency in a special thick coal seam through hydraulic flushing[J]. International Journal of Rock Mechanics and Mining Sciences，2019，124：104085.

[5] 李国富，李超，张碧川，等. 我国煤矿瓦斯抽采与利用发展历程、技术进展及展望[J]. 煤田地质与勘探，2025，53(1)：77−91.

LI Guofu，LI Chao，ZHANG Bichuan，et al. Gas drainage and utilization in coal mines in China：History，technological advances，and prospects[J]. Coal Geology & Exploration，2025，53(1)：77−91.

[6] 张千贵，李权山，范翔宇，等. 中国煤与煤层气共采理论技术现状及发展趋势[J]. 天然气工业，2022，42(6)：130−145.

ZHANG Qiangui，LI Quanshan，FAN Xiangyu，et al. Current situation and development trend of theories and technologies for coal and CBM co–mining in China[J]. Natural Gas Industry，2022，42(6)：130−145.

[7] 余旭. 煤层脉动水力压裂压力波沿裂隙传播规律和解堵机理研究[D]. 徐州：中国矿业大学，2016.

YU Xu. Research on propagation law of hydraulic fracture pressure wave in coal fissures and blockings removal mechanism[D]. Xuzhou：China University of Mining and Technology，2016.

[8] 孙四清，李文博，张俭，等. 煤矿井下长钻孔分段水力压裂技术研究进展及发展趋势[J]. 煤田地质与勘探，2022，50(8)：1−15.

SUN Siqing，LI Wenbo，ZHANG Jian，et al. Research progress and development trend of staged hydraulic fracturing technology in long–borehole underground coal mine[J]. Coal Geology & Exploration，2022，50(8)：1−15.

[9] 卢义玉，黄辰，贾亚杰，等. 近距离煤层群水射流割缝卸压石门快速揭煤技术分析[J]. 重庆大学学报，2014，37(3)：95−100.

LU Yiyu，HUANG Chen，JIA Yajie，et al. Analysis on rock cross–cut coal uncovering using high pressure water jet slotting in close distance seam group[J]. Journal of Chongqing University，2014，37(3)：95−100.

[10] 张浩. 构造煤层掘进工作面区域性顺层水力造穴强化瓦斯抽采机制与工程应用[D]. 徐州：中国矿业大学，2020.

ZHANG Hao. Regional in–seam borehole hydraulic cavitating in the driving face of tectonic coal seam：Gas extraction enhancing mechanism and field application[D]. Xuzhou：China University of Mining and Technology，2020.

[11] ZHANG Hao，CHENG Yuanping，LIU Qingquan，et al. A novel in–seam borehole hydraulic flushing gas extraction technology in the heading face：Enhanced permeability mechanism，gas flow characteristics，and application[J]. Journal of Natural Gas Science and Engineering，2017，46：498−514.

[12] 田苗苗，张磊，薛俊华，等. 液氮致裂煤体技术研究现状及展望[J]. 煤炭科学技术，2022，50(7)：191−198.

TIAN Miaomiao，ZHANG Lei，XUE Junhua，et al. Study and prospection of liquid nitrogen fracturing coal technology[J]. Coal Science and Technology，2022，50(7)：191−198.

[13] 郭德勇，赵杰超，吕鹏飞，等. 煤层深孔聚能爆破有效致裂范围探讨[J]. 工程科学学报，2019，41(5)：582−590.

GUO Deyong，ZHAO Jiechao，LYU Pengfei，et al. Effective fracture zone under deep–hole cumulative blasting in coal seam[J]. Chinese Journal of Engineering，2019，41(5)：582−590.

[14] 龙泳翰，张磊，李菁华，等. 注气驱替机理研究现状及展望[J]. 矿业安全与环保，2023，50(1)：103−108.

LONG Yonghan，ZHANG Lei，LI Jinghua，et al. Research status and prospect of gas injection displacement mechanism[J]. Mining Safety & Environmental Protection，2023，50(1)：103−108.

[15] 吕伟伟，闫大鹤，李开万，等. 水力冲孔增透技术在提高煤层瓦斯抽采效率方面的应用[J]. 煤炭科技，2023，44(5)：115−120.

LYU Weiwei，YAN Dahe，LI Kaiwan，et al. Application of hydraulic punching and permeability enhancement technology in improving the efficiency of coal seam gas extraction[J]. Coal Science & Technology Magazine，2023，44(5)：115−120.

[16] 曹佐勇，王恩元，何学秋，等. 近距离突出煤层群水力冲孔卸压瓦斯抽采及效果评价研究[J]. 采矿与安全工程学报，2021，38(3)：634−642.

CAO Zuoyong，WANG Enyuan，HE Xueqiu，et al. Effect evaluation of pressure relief and gas drainage of hydraulic punching in short–distance coal seam group with the risk of outburst[J]. Journal of Mining & Safety Engineering，2021，38(3)：634−642.

[17] 王亮，廖晓雪，褚鹏，等. 瓦斯抽采穿层钻孔钻扩造穴卸压增透机理研究[J]. 煤炭科学技术，2021，49(5)：75−82.

WANG Liang，LIAO Xiaoxue，CHU Peng，et al. Study on mechanism of permeability improvement for gas drainage by cross–seam cavitation borehole[J]. Coal Science and Technology，2021，49(5)：75−82.

[18] 袁亮，林柏泉，杨威. 我国煤矿水力化技术瓦斯治理研究进展及发展方向[J]. 煤炭科学技术，2015，43(1)：45−49.

YUAN Liang，LIN Baiquan，YANG Wei. Research progress and development direction of gas control with mine hydraulic technology in China coal mine[J]. Coal Science and Technology，2015，43(1)：45−49.

[19] 刘震，李增华，杨永良，等. 缓斜特厚煤层石门揭煤区域综合防突技术[J]. 煤矿安全，2010，41(8)：23–26

[20] 马中飞，俞启香. 水力卸压防止承压散体煤和瓦斯突出机理[J]. 中国矿业大学学报，2007，36(1)：103−106.

MA Zhongfei，YU Qixiang. Mechanism of preventing coal and gas compression disseminated values outburst with stress pre–released hydraulically[J]. Journal of China University of Mining & Technology，2007，36(1)：103−106.

[21] 王青松，金龙哲，孙金华. 煤层注水过程分析和煤体润湿机理研究[J]. 安全与环境学报，2004，4(1)：70−73.

WANG Qingsong，JIN Longzhe，SUN Jinhua. A research on coal seam water infusion course and coal body wetness mechanism[J]. Journal of Safety and Environment，2004，4(1)：70−73.

[22] 卢义玉，黄杉，葛兆龙，等. 我国煤矿水射流卸压增透技术进展与战略思考[J]. 煤炭学报，2022，47(9)：3189−3211.

LU Yiyu，HUANG Shan，GE Zhaolong，et al. Research progress and strategic thinking of coal mine water jet technology to enhance coal permeability in China[J]. Journal of China Coal Society，2022，47(9)：3189−3211.

[23] 王力，姚宁平，姚亚峰，等. 煤矿井下碎软煤层顺层钻完孔技术研究进展[J]. 煤田地质与勘探，2021，49(1)：285−296.

WANG Li，YAO Ningping，YAO Yafeng，et al. Research progress of drilling and borehole completion technologies in broken soft coal seam in underground coal mine[J]. Coal Geology & Exploration，2021，49(1)：285−296.

[24] 庞涛，姜在炳，杜天林，等. 煤矿井下穿层钻孔多方位极小半径冲孔技术[J]. 煤矿安全，2023，54(10)：206−211.

PANG Tao，JIANG Zaibing，DU Tianlin，et al. Multi–azimuth minimal radius punching technology for strata–penetrating borehole of underground coal mine[J]. Safety in Coal Mines，2023，54(10)：206−211.

[25] 梁银权，王进尚，冯星宇. 贵州矿区“两高一低”煤层钻冲联动高效抽采技术研究[J]. 煤炭工程，2019，51(10)：63−66.

LIANG Yinquan，WANG Jinshang，FENG Xingyu. Study on the high efficiency gas extraction technology with coordinated drilling and flushing for high–gas high–pressure and low–permeability coal seams in Guizhou mining area[J]. Coal Engineering，2019，51(10)：63−66.

[26] 段贺明，王毅，金新，等. 随钻水力造穴技术在新安矿低透煤层中的应用[J]. 煤炭技术，2022，41(3)：160−163.

DUAN Heming，WANG Yi，JIN Xin，et al. Application of hydraulic flushing cavity technology while drilling in low–permeability coal seam in Xin’an coal mine[J]. Coal Technology，2022，41(3)：160−163.