Parameter characteristics and rock-breaking mechanisms of horizontal drilling of underground collapsed bodies in coal mines

Authors

YAO Ningping, CCTEG China Coal Research Institute, Beijing 100013, China; CCTEG Xi’an Research Institute (Group) Co., Ltd., Xi’an 710077, ChinaFollow
DOU Xuqian, CCTEG China Coal Research Institute, Beijing 100013, China; CCTEG Xi’an Research Institute (Group) Co., Ltd., Xi’an 710077, ChinaFollow
HAN Zhaoyang, Faculty of Engineering, China University of Geosciences, Wuhan 430074, China
ZHANG Guohua, Faculty of Engineering, China University of Geosciences, Wuhan 430074, China; School of Sustainable Energy, China University of Geosciences, Wuhan 430074, China
SUN Yuchen, Faculty of Engineering, China University of Geosciences, Wuhan 430074, China
LI Hao, CCTEG China Coal Research Institute, Beijing 100013, China; CCTEG Xi’an Research Institute (Group) Co., Ltd., Xi’an 710077, China
WANG Li, CCTEG Xi’an Research Institute (Group) Co., Ltd., Xi’an 710077, China

Abstract

Objective With continuously increasing coal mining depth, the risks of hazards such as roof collapse and personnel entrapment caused by high in situ stress and mining-induced pressure have significantly intensified. Drilling emerges as a key means of rapidly establishing rescue passageways. However, the drilling process tends to face multiple challenges, including complex geological structures, unstable collapsed bodies, and low drilling efficiency. Methods This study aims to reveal the rock-breaking mechanisms during the drilling of collapsed bodies, optimize drilling parameters to ensure reliable borehole formation, and achieve efficient drilling of collapsed bodies. To this end, this study developed a large-scale experimental platform that integrated impact-rotary horizontal drilling and real-time measurement while drilling. This platform allowed for real-time acquisition and control of nine drilling parameters, including drilling speed, propulsive force, propulsive pressure, rotational pressure, and percussive pressure, meeting the requirements of full-process dynamic monitoring. Based on this platform, model experiments for simulating typical fabrics and structures of collapsed bodies were designed using M20, C30, and C50 materials, followed by the comparison of the variation patterns of drilling parameters under varying strengths and states. Results and Conclusions The strength and occurrence states of the drilled rock masses can be effectively characterized using parameters including the curve morphology of the drilling stroke, the abrupt change response of drilling speed, the transition interval and periodic fluctuations of propulsive force, and the fluctuating amplitude of rotational pressure. In combination with borehole morphology and fracturing patterns, this study proposed that the strategy characterized by low impact pressure, low propulsive pressure, and high rotational speed, which assists in reducing disturbance and improving drilling stability in roadway penetration sections. The experiments revealed the rock-breaking mechanism of graded responses based on rock block size, cascaded transformation of fracturing modes, and progressive and cyclic drilling within the collapsed bodies. Specifically, small loose fragments were prone to be disturbed and discharged. Medium-sized rock blocks tended to form temporary support structures together with loose fragments and were then fractured and involved in the cutting discharge circulation. In contrast, large, isolated rocks either entered the discharge circulation after partial fracturing or remained in place after forming penetration pathways due to their high integrity. This reflects the interactions between the drill system and rocks, as well as the dynamic structural evolution, during drilling. The results of this study provide theoretical support for rock identification, parameter optimization, and safety control during the drilling of underground collapsed bodies, thus contributing to scientific decision-making and precise operations during emergency rescue.

Keywords

drilling rescue, drilling of collapsed bodies, measurement while drilling, rock-breaking mechanism, parameter identification, coal mine

DOI

10.12363/issn.1001-1986.25.04.0285

Recommended Citation

YAO Ningping, DOU Xuqian, HAN Zhaoyang, et al. (2025) "Parameter characteristics and rock-breaking mechanisms of horizontal drilling of underground collapsed bodies in coal mines," Coal Geology & Exploration: Vol. 53: Iss. 8, Article 20.
DOI: 10.12363/issn.1001-1986.25.04.0285
Available at: https://cge.researchcommons.org/journal/vol53/iss8/20

Reference

[1] 程建远，陆自清，蒋必辞，等. 煤矿巷道快速掘进的“长掘长探”技术[J]. 煤炭学报，2022，47(1)：404−412.

CHENG Jianyuan，LU Ziqing，JIANG Bici，et al. A novel technology of “long excavation/long detection” for rapid excavation in coal mine roadway[J]. Journal of China Coal Society，2022，47(1)：404−412.

[2] 王虹，王建利，张小峰. 掘锚一体化高效掘进理论与技术[J]. 煤炭学报，2020，45(6)：2021−2030.

WANG Hong，WANG Jianli，ZHANG Xiaofeng. Theory and technology of efficient roadway advance with driving and bolting integration[J]. Journal of China Coal Society，2020，45(6)：2021−2030.

[3] 王兆会，唐岳松，李辉，等. 千米深井超长工作面支架阻力分布特征及影响因素研究[J]. 采矿与安全工程学报，2023，40(1)：1−10.

WANG Zhaohui，TANG Yuesong，LI Hui，et al. Distribution and influence factors of support resistance in longwall panel with large face length of a kilometer–deep coal mine[J]. Journal of Mining & Safety Engineering，2023，40(1)：1−10.

[4] 蓝航，陈东科，毛德兵. 我国煤矿深部开采现状及灾害防治分析[J]. 煤炭科学技术，2016，44(1)：39−46.

LAN Hang，CHEN Dongke，MAO Debing. Current status of deep mining and disaster prevention in China[J]. Coal Science and Technology，2016，44(1)：39−46.

[5] 齐庆新，潘一山，舒龙勇，等. 煤矿深部开采煤岩动力灾害多尺度分源防控理论与技术架构[J]. 煤炭学报，2018，43(7)：1801−1810.

QI Qingxin，PAN Yishan，SHU Longyong，et al. Theory and technical framework of prevention and control with different sources in multi–scales for coal and rock dynamic disasters in deep mining of coal mines[J]. Journal of China Coal Society，2018，43(7)：1801−1810.

[6] 刘喜军. 深井煤岩瓦斯动力灾害防治研究[J]. 煤炭科学技术，2018，46(11)：69−75.

LIU Xijun. Study on coal and rock gas dynamics disaster prevention and control in deep mine[J]. Coal Science and Technology，2018，46(11)：69−75.

[7] 张国华，李文成，陈刚，等. 垮冒堆积体中救援通道位置及断面形状的模拟[J]. 黑龙江科技大学学报，2017，27(1)：1−7.

ZHANG Guohua，LI Wencheng，CHEN Gang，et al. Simulation study on rescue channel position and section shape selection for accumulation body of collapse–caving[J]. Journal of Heilongjiang University of Science and Technology，2017，27(1)：1−7.

[8] 陈光波，李谭，陈世江，等. 煤矿灾后垮冒堆积体变形特征及力学机制[J]. 太原理工大学学报，2021，52(3)：335−342.

CHEN Guangbo，LI Tan，CHEN Shijiang，et al. Deformation characteristics and mechanical mechanism of collapse accumulation body after coal mine disaster[J]. Journal of Taiyuan University of Technology，2021，52(3)：335−342.

[9] 张晓景. 大口径钻机在隧道塌方体中钻进的力学性能及优化控制研究[D]. 重庆：重庆大学，2018.

ZHANG Xiaojing. Study on mechanical properties and optimization control of the large diameter rig drilling in tunnel collapse[D]. Chongqing：Chongqing University，2018.

[10] 田宏亮，邹祖杰，郝世俊，等. 矿山灾害生命保障救援通道快速安全构建关键技术与装备[J]. 煤田地质与勘探，2022，50(11)：1−13.

TIAN Hongliang，ZOU Zujie，HAO Shijun，et al. Key technologies and equipment of quickly and safely building life support and rescue channel in mine disaster[J]. Coal Geology & Exploration，2022，50(11)：1−13.

[11] 王雷，朱玉芹，张维娜，等. 煤矿大直径救援钻孔顶管钻进装备关键技术研究[J]. 煤田地质与勘探，2022，50(11)：58−66.

WANG Lei，ZHU Yuqin，ZHANG Weina，et al. Research on key technology of pipe jacking drilling equipment for large–diameter rescue borehole of coal mine[J]. Coal Geology & Exploration，2022，50(11)：58−66.

[12] 顾海荣，单增海，王龙鹏，等. 大直径钻孔救援提升装备研究进展[J]. 煤田地质与勘探，2022，50(11)：45−57.

GU Hairong，SHAN Zenghai，WANG Longpeng，et al. Research progress of lifting equipment for large–diameter borehole rescue[J]. Coal Geology & Exploration，2022，50(11)：45−57.

[13] 于庆磊，王宇恒，李友，等. 基于随钻测量的岩体结构与力学参数表征研究进展[J]. 金属矿山，2023(5)：45−58.

YU Qinglei，WANG Yuheng，LI You，et al. Research progress of rock mass structure and mechanical parameter characterization based on measurement while drilling technology[J]. Metal Mine，2023(5)：45−58.

[14] PECK J，SCOBLE M J，CARTER M. Interpretation of drilling parameters for ground characterization in exploration and development of quarries[J]. Transactions of the Institution of Mining and Metallurgy. Section B. Applied Earth Science，1987，96：PB141−B148.

[15] 王琦，高红科，蒋振华，等. 地下工程围岩数字钻探测试系统研发与应用[J]. 岩石力学与工程学报，2020，39(2)：301−310.

WANG Qi，GAO Hongke，JIANG Zhenhua，et al. Development and application of a surrounding rock digital drilling test system of underground engineering[J]. Chinese Journal of Rock Mechanics and Engineering，2020，39(2)：301−310.

[16] 马语航，何明明，李宁. XCY–2旋切触探系统研发及应用[J]. 岩土力学，2025，46(3)：1025−1038.

MA Yuhang，HE Mingming，LI Ning. Development of the XCY–2 rotary cutting and penetrating system and its application[J]. Rock and Soil Mechanics，2025，46(3)：1025−1038.

[17] SCHUNNESSON H. RQD predictions based on drill performance parameters[J]. Tunnelling and Underground Space Technology，1996，11(3)：345−351.

[18] LIU Wenpeng，ROSTAMI J，ELSWORTH D，et al. Application of composite indices for improving joint detection capabilities of instrumented roof bolt drills in underground mining and construction[J]. Rock Mechanics and Rock Engineering，2018，51(3)：849−860.

[19] RODGERS M，MCVAY M，FERRARO C，et al. Measuring rock strength while drilling shafts socketed into Florida limestone[J]. Journal of Geotechnical and Geoenvironmental Engineering，2018，144(3)：04017121.

[20] RODGERS M，MCVAY M，HORHOTA D，et al. Assessment of rock strength from measuring while drilling shafts in Florida limestone[J]. Canadian Geotechnical Journal，2018，55(8)：1154−1167.

[21] WANG Qi，GAO Song，LI Shucai，et al. Upper bound analytic mechanics model for rock cutting and its application in field testing[J]. Tunnelling and Underground Space Technology，2018，73：287−294.

[22] WANG Qi，GAO Hongke，YU Hengchang，et al. Method for measuring rock mass characteristics and evaluating the grouting–reinforced effect based on digital drilling[J]. Rock Mechanics and Rock Engineering，2019，52(3)：841−851.

[23] ZHANG Guohua，YU Jiacheng，HAN Zhaoyang，et al. A rock strength prediction model utilizing real–time data from percussion–rotary drilling measurements[J]. Rock Mechanics and Rock Engineering，2025，58(7)：7783−7803.

[24] HASHIBA K，FUKUI K. Review of theoretical，experimental，and numerical studies on rotary percussive rock drilling[J]. International Journal of Mining，Reclamation and Environment，2024，38(2)：167−191.

[25] YU Xiaoyue，HE Mingming，HAO Wei，et al. Drilling process monitoring for predicting mechanical properties of jointed rock mass：A review[J]. Buildings，2024，14(7)：1992.

[26] 张国华，于会军，郝传波，等. 断层破碎带垮冒堆积体边界被动抗力分布规律[J]. 采矿与安全工程学报，2018，35(3)：532−537.

ZHANG Guohua，YU Huijun，HAO Chuanbo，et al. Resistance force distribution law of collapse caving accumulation body’s boundary in fault fracture zone[J]. Journal of Mining & Safety Engineering，2018，35(3)：532−537.

[27] VAN ELDERT J，SCHUNNESSON H，JOHANSSON D，et al. Application of measurement while drilling technology to predict rock mass quality and rock support for tunnelling[J]. Rock Mechanics and Rock Engineering，2020，53(3)：1349−1358.

[28] 麻坦，诸葛雷，赵伟东. 矿山地面救援应急响应与大直径钻孔关键技术[J]. 煤田地质与勘探，2024，52(9)：192−202.

MA Tan，ZHUGE Lei，ZHAO Weidong. Emergency response and critical technologies for large–diameter boreholes in mine rescue through surface drilling[J]. Coal Geology & Exploration，2024，52(9)：192−202.

[29] 李必智，郝世俊，刘明军，等. 大直径救援井动载荷作用下安全透巷距离数值模拟[J]. 煤田地质与勘探，2021，49(2)：260−266.

LI Bizhi，HAO Shijun，LIU Mingjun，et al. Numerical simulation of safe distance through roadway drilling under dynamic load of large diameter rescue well[J]. Coal Geology & Exploration，2021，49(2)：260−266.

[30] ZHAO Ruijie，SHI Shaoshuai，YAO Rubing，et al. Application of relationship model for the measurement while drilling data to predict rock uniaxial compressive strength for tunneling[J]. Rock Mechanics and Rock Engineering，2024，57(9)：7187−7203.