Engineering practice of advance gas control for crushed soft coal seams through directional fracturing using a long borehole in the coal seam roof

Authors

JIA Bingyi, CCTEG Xi'an Research Institute (Group) Co., Ltd., Xi'an 710077, China; College of Safety Science and Engineering, Xi'an University of Science and Technology, Xi'an 710054, ChinaFollow
LI Shugang, College of Safety Science and Engineering, Xi'an University of Science and Technology, Xi'an 710054, China
CHEN Dongdong, CCTEG Xi'an Research Institute (Group) Co., Ltd., Xi'an 710077, China
ZHANG Qun, CCTEG Xi'an Research Institute (Group) Co., Ltd., Xi'an 710077, China

Abstract

Objective and Methods The crushed soft coal seams susceptible to intense coal and gas outbursts exhibit high gas content and pressure. Consequently, during borehole drilling for regional gas pre-drainage in such coal seams, high blowout intensity is prone to cause gas overrun and low drilling efficiency. To accelerate its development, this study analyzed the status and adaptability of existing technologies for regional advance gas drainage and pressure relief, as well as the fracture propagation characteristics of coal seam roofs during indirect fracturing using boreholes near the roofs. Accordingly, this study proposed an advance gas drainage and pressure relief technology for crushed soft coal seams with mudstone roofs, which integrates directional sandblasting perforation and proppant injection-based segmented hydraulic fracturing within the borehole casing. Furthermore, this study optimized the borehole structure based on stratigraphic characteristics. To verify the proposed technology, this study conducted a field engineering experiment at the Luling coal mine, Huaibei mining area, Anhui Province, completing the drilling and casing cementing of a 520-m-deep borehole. The casing cementing was achieved using a 110-m-long surface casing (diameter: 219 mm), a 520-m-long intermediate casing (diameter: 114.3 mm), and cement slurry injection under pressure. The borehole was divided into nine segments for perforation and fracturing, with 78 holes formed through 39 perforations. The hydraulic fracturing was implemented with single-segment fluid injection volumes ranging from 210 m³ to 420 m³, maximum pumping pressures from 17.8 MPa to 28.3 MPa, and injected proppant ratios from 2.5% to 3.3%.Results and Conclusions After 257 days of gas drainage from the borehole subjected to fracturing, the cumulative pure gas production exceeded 8×10⁵ m³, with a regional pre-drainage rate reaching up to 15.5%. The gas volume fractions within ranges of 0‒15 m and 15‒30 m on both sides of the borehole’s horizontal section decreased by 27.05% and 11.36%, respectively. Concurrently, the gas pressure at planar distances of 0 m and 15 m from the borehole decreased from 2.78 MPa to 1.14 MPa and 1.75 MPa, respectively, with decreasing amplitude exceeding 37%. These results suggest significant effects of regional advance gas drainage and pressure relief, substantiating the feasibility and effectiveness of the proposed technology. In the zone undergoing advance gas drainage and pressure relief, the blowout rate and intensity of boreholes for gas pre-drainage decreased by 57.89% and 67.11%, respectively. Furthermore, the one-time hole-forming rate and hole-supplementing rate of these boreholes increased by 19% and decreased by 74.87%, respectively, with the average shift meterage per of drilling rigs within the same time interval increasing by 34%. No gas anomalies occurred during the borehole drilling, suggesting significant safety benefits. The proposed technology can serve as a reference for the advance control of gas disasters in mines with similar geologic conditions and has been applied to the Huainan mining area.

Keywords

broken-soft coal seam, advance gas drainage and pressure relief, directional fracturing, long borehole in the roof, mudstone, gas drainage

DOI

10.12363/issn.1001-1986.24.07.0430

Recommended Citation

JIA Bingyi, LI Shugang, CHEN Dongdong, et al. (2025) "Engineering practice of advance gas control for crushed soft coal seams through directional fracturing using a long borehole in the coal seam roof," Coal Geology & Exploration: Vol. 53: Iss. 3, Article 4.
DOI: 10.12363/issn.1001-1986.24.07.0430
Available at: https://cge.researchcommons.org/journal/vol53/iss3/4

Reference

[1] 程远平，王成浩. 构造煤变形能及在煤与瓦斯突出中的作用[J]. 煤炭学报，2024，49(2)：645−663.

CHENG Yuanping，WANG Chenghao. Deformation energy of tectonic coal and its role in coal and gas outbursts[J]. Journal of China Coal Society，2024，49(2)：645−663.

[2] 张群，降文萍，姜在炳，等. 我国煤矿区煤层气地面开发现状及技术研究进展[J]. 煤田地质与勘探，2023，51(1)：139−158.

ZHANG Qun，JIANG Wenping，JIANG Zaibing，et al. Present situation and technical research progress of coalbed methane surface development in coal mining areas of China[J]. Coal Geology & Exploration，2023，51(1)：139−158.

[3] 张超林，刘明亮，王恩元，等. 煤层渗透性对煤与瓦斯突出的影响规律及控制机理[J]. 煤炭学报，2024，49(12)：4842−4854.

ZHANG Chaolin，LIU Mingliang，WANG Enyuan，et al. Influence law and control mechanism of coal seam permeability on coal and gas outburst[J]. Journal of China Coal Society，2024，49(12)：4842−4854.

[4] 郑凯歌. 碎软低透煤层底板梳状长钻孔分段水力压裂增透技术研究[J]. 采矿与安全工程学报，2020，37(2)：272−281.

ZHENG Kaige. Permeability improving technology by sectional hydraulic fracturing for comb–like long drilling in floor of crushed and soft coal seam with low permeability[J]. Journal of Mining & Safety Engineering，2020，37(2)：272−281.

[5] 林海飞，黄猛，李志梁，等. 注气驱替抽采瓦斯技术在高瓦斯突出矿井煤巷掘进中的试验[J]. 矿业安全与环保，2016，43(3)：10−12.

LIN Haifei，HUANG Meng，LI Zhiliang，et al. Test of forced gas drainage technology by air injection for gas replacement in coal roadway driving of high gassy and outburst mine[J]. Mining Safety & Environmental Protection，2016，43(3)：10−12.

[6] 翟成，丛钰洲，陈爱坤，等. 中国煤矿瓦斯突出灾害治理的若干思考及展望[J]. 中国矿业大学学报，2023，52(6)：1146−1161.

ZHAI Cheng，CONG Yuzhou，CHEN Aikun，et al. Reflection and prospect on the prevention of gas outburst disasters in China’s coal mines[J]. Journal of China University of Mining & Technology，2023，52(6)：1146−1161.

[7] 聂超，王毅，姚亚峰. 碎软煤层空气定向钻进煤粉运移规律数值模拟研究[J]. 煤矿安全，2022，53(3)：175−180.

NIE Chao，WANG Yi，YAO Yafeng. Numerical simulation of pulverized coal migration law in air directional drilling in broken soft coal seam[J]. Safety in Coal Mines，2022，53(3)：175−180.

[8] 贾建称，陈晨，董夔，等. 碎软低渗煤层顶板水平井分段压裂高效抽采煤层气技术研究[J]. 天然气地球科学，2017，28(12)：1873−1881.

JIA Jiancheng，CHEN Chen，DONG Kui，et al. Research on the technology of high efficient to drainage CBM by multistage fracturing in horizontal well along the roof of broken soft and low permeability coal seam[J]. Natural Gas Geoscience，2017，28(12)：1873−1881.

[9] 张群，孙四清，降文萍. 碎软低渗煤层煤矿区煤层气勘探开发关键技术及发展方向[J]. 石油学报，2024，45(5)：855−865.

ZHANG Qun，SUN Siqing，JIANG Wenping. Key technologies and development direction of CBM exploration and development in coal mine area of fractured soft and low permeability coal seams[J]. Acta Petrolei Sinica，2024，45(5)：855−865.

[10] 桑树勋，皇凡生，单衍胜，等. 碎软低渗煤储层强化与煤层气地面开发技术进展[J]. 煤炭科学技术，2024，52(1)：196−210.

SANG Shuxun，HUANG Fansheng，SHAN Yansheng，et al. Technology processes of enhancement of broken soft and low permeability coal reservoir and surface development of coalbed methane[J]. Coal Science and Technology，2024，52(1)：196−210.

[11] 张群，葛春贵，李伟，等. 碎软低渗煤层顶板水平井分段压裂煤层气高效抽采模式[J]. 煤炭学报，2018，43(1)：150−159.

ZHANG Qun，GE Chungui，LI Wei，et al. A new model and application of coalbed methane high efficiency production from broken soft and low permeable coal seam by roof strata–in horizontal well and staged hydraulic fracture[J]. Journal of China Coal Society，2018，43(1)：150−159.

[12] GAO Deli，BI Yansen，XIAN Bao’an. Technical advances in well type and drilling & completion for high–efficient development of coalbed methane in China[J]. Natural Gas Industry B，2022，9(6)：561−577.

[13] 李雪娇，陈帅，甄怀宾，等. 碎软煤层夹矸间接压裂开发煤层气技术研究[J]. 钻采工艺，2022，45(5)：69−74.

LI Xuejiao，CHEN Shuai，ZHEN Huaibin，et al. Study on indirect fracturing technology for CBM development in the parting of broken soft coal seams[J]. Drilling & Production Technology，2022，45(5)：69−74.

[14] 周加佳. 水平井分段压裂技术在煤层气开发中的应用实践[J]. 中国煤炭地质，2019，31(8)：27−30.

ZHOU Jiajia. Application practice of horizontal well segmental fracturing technology in CBM exploitation[J]. Coal Geology of China，2019，31(8)：27−30.

[15] 冯达晖. 煤矿井下分段水力压裂梳状定向长钻孔钻进技术研究[J]. 探矿工程(岩土钻掘工程)，2018，45(5)：8−12.

FENG Dahui. Research on the technology of comb–shaped long directional hole drilling by segmented hydraulic fracturing in underground coal mine[J]. Exploration Engineering(Rock & Soil Drilling and Tunneling)，2018，45(5)：8−12.

[16] 贾秉义，陈冬冬，吴杰，等. 煤矿井下顶板梳状长钻孔分段压裂强化瓦斯抽采实践[J]. 煤田地质与勘探，2021，49(2)：70−76.

JIA Bingyi，CHEN Dongdong，WU Jie，et al. Practice of enhanced gas extraction by staged fracturing with comb–shaped long hole in coal mine roof[J]. Coal Geology & Exploration，2021，49(2)：70−76.

[17] 陈冬冬，孙四清，张俭，等. 井下定向长钻孔水力压裂煤层增透技术体系与工程实践[J]. 煤炭科学技术，2020，48(10)：84−89.

CHEN Dongdong，SUN Siqing，ZHANG Jian，et al. Technical system and engineering practice of coal seam permeability improvement through underground directional long borehole hydraulic fracturing[J]. Coal Science and Technology，2020，48(10)：84−89.

[18] 袁亮. 低透高瓦斯煤层群安全开采关键技术研究[J]. 岩石力学与工程学报，2008，27(7)：1370−1379.

YUAN Liang. Key technique of safe mining in low permeability and methane–rich seam group[J]. Chinese Journal of Rock Mechanics and Engineering，2008，27(7)：1370−1379.

[19] 杨科，刘帅. 深部远距离下保护层开采多关键层运移–裂隙演化–瓦斯涌出动态规律研究[J]. 采矿与安全工程学报，2020，37(5)：991−1000.

YANG Ke，LIU Shuai. Rule of multi–key strata movement–fracture evolution–dynamics of gas emission in deep long distance lower protective layer mining[J]. Journal of Mining & Safety Engineering，2020，37(5)：991−1000.

[20] 刘乐，张俭，方秦月，等. 碎软低渗煤层顶板定向长钻孔水力加砂分段压裂工程应用[J]. 煤炭科学技术，2022，50(8)：91−100.

LIU Le，ZHANG Jian，FANG Qinyue，et al. Application of hydraulic sand staged fracturing in directional long drilling of roof in broken soft and low permeability coal seam[J]. Coal Science and Technology，2022，50(8)：91−100.

[21] 孙四清，李文博. 井下碎软煤层顶板加砂分段压裂瓦斯高效抽采技术[J]. 工矿自动化，2022，48(12)：101−107.

SUN Siqing，LI Wenbo. High–efficiency gas extraction technology of staged fracturing roof with sand of underground broken and soft coal seam[J]. Journal of Mine Automation，2022，48(12)：101−107.

[22] 王晶，段静，李丹丹，等. 沁水盆地15号煤层顶板分段压裂水平井适应性及产气效果预测[J]. 中国煤炭地质，2022，34(6)：16−20.

WANG Jing，DUAN Jing，LI Dandan，et al. Coal No.15 roof staged fracturing horizontal well adaptability and gas production effect prediction in Qinshui Basin[J]. Coal Geology of China，2022，34(6)：16−20.

[23] 龚迪光，曲占庆，李建雄，等. 基于ABAQUS平台的水力裂缝扩展有限元模拟研究[J]. 岩土力学，2016，37(5)：1512−1520.

GONG Diguang，QU Zhanqing，LI Jianxiong，et al. Extended finite element simulation of hydraulic fracture based on ABAQUS platform[J]. Rock and Soil Mechanics，2016，37(5)：1512−1520.

[24] 许耀波，张培河，范宗洋，等. 碎软煤层顶板水平井穿层压裂裂缝扩展规律及敏感因素分析[J]. 采矿与安全工程学报，2023，40(2)：420−428.

XU Yaobo，ZHANG Peihe，FAN Zongyang，et al. Fracture propagation law and sensitive factors analysis of layer–penetrating fracturing in the horizontal well within roof strata of broken–soft coal seam[J]. Journal of Mining & Safety Engineering，2023，40(2)：420−428.

[25] LI D Q，ZHANG S C，ZHANG S A. Experimental and numerical simulation study on fracturing through interlayer to coal seam[J]. Journal of Natural Gas Science and Engineering，2014，21：386−396.

[26] 杨祎超，徐宏杰，刘会虎，等. 芦岭煤矿10号煤层瓦斯赋存及其控制因素综合评价[J]. 煤矿安全，2024，55(2)：27−34.

YANG Yichao，XU Hongjie，LIU Huihu，et al. Gas occurrence of No.10 coal seam and comprehensive evaluation of its control factors in Luling Coal Mine[J]. Safety in Coal Mines，2024，55(2)：27−34.

[27] 田花永. 芦岭煤矿Ⅱ水平地应力场特征及其对巷道变形影响研究[D]. 淮南：安徽理工大学，2010.

TIAN Huayong. Study on ground stress of second level and it’s influence to the roadway deformation of Luling Coal Mine[D]. Huainan：Anhui University of Science & Technology，2010.

[28] 秦利峰，刘忠，刘玉明，等. 水力喷射压裂工艺在郑庄里必区块煤层气开发中的应用[J]. 中国煤层气，2016，13(4)：30−33.

QIN Lifeng，LIU Zhong，LIU Yuming，et al. Application of hydrojet fracturing technology of CBM exploitation in Zhengzhuang Libi Block[J]. China Coalbed Methane，2016，13(4)：30−33.

[29] 张玉浩，杨永康，王晨龙. 碎软煤层顶板水力压裂多裂缝穿层扩展规律研究[J]. 煤矿安全，2024，55(12)：63−71.

ZHANG Yuhao，YANG Yongkang，WANG Chenlong. Study on the law of multi–fracture through–layer propagation of crushed soft coal seam roof by hydraulic fracturing[J]. Safety in Coal Mines，2024，55(12)：63−71.

[30] 武强，王显辉，曾一凡，等. 基于EWOA–VMD的钻孔弹性波处理与煤岩识别方法[J]. 中国矿业大学学报，2024，53(5)：857−871.

WU Qiang，WANG Xianhui，ZENG Yifan，et al. Drilling elastic wave processing and coal–rock identification method based on EWOA–VMD[J]. Journal of China University of Mining & Technology，2024，53(5)：857−871.

[31] 陈泽平，闫保永，王国震，等. 煤矿井下随钻测量技术研究现状及展望[J]. 矿业安全与环保，2022，49(6)：130−134.

CHEN Zeping，YAN Baoyong，WANG Guozhen，et al. Research status and prospect of MWD technology in coal mine[J]. Mining Safety & Environmental Protection，2022，49(6)：130−134.

[32] 陈龙，陈刚，张冀冠. 矿用随钻动态方位伽马仪器的研制与应用[J]. 煤田地质与勘探，2022，50(1)：86−91.

CHEN Long，CHEN Gang，ZHANG Jiguan. Development and application of a mine–used dynamic azimuth gamma instrument while drilling[J]. Coal Geology & Exploration，2022，50(1)：86−91.