Optimization and application of sand bailing technology for coalbed methane horizontal wells

Authors

ZHANG Fei, China United Coalbed Methane Co., Ltd., Beijing 100015, China; Provincial Center of Technology Innovation for Coal Measure Gas Co-Production, Taiyuan 030032, ChinaFollow
WANG Yibing, Xinjiang Yaxin Coalbed Methane Investment and Development (Group) Co., Ltd., Urumqi 830009, China
CHENG Lu, China United Coalbed Methane Co., Ltd., Beijing 100015, China; Provincial Center of Technology Innovation for Coal Measure Gas Co-Production, Taiyuan 030032, China
MEI Wenbo, China United Coalbed Methane Co., Ltd., Beijing 100015, China; Provincial Center of Technology Innovation for Coal Measure Gas Co-Production, Taiyuan 030032, China
YANG Qi, China United Coalbed Methane Co., Ltd., Beijing 100015, China; Provincial Center of Technology Innovation for Coal Measure Gas Co-Production, Taiyuan 030032, China
SHEN Wenjie, China United Coalbed Methane Co., Ltd., Beijing 100015, China; Provincial Center of Technology Innovation for Coal Measure Gas Co-Production, Taiyuan 030032, China
CAO Chao, China United Coalbed Methane Co., Ltd., Beijing 100015, China; Provincial Center of Technology Innovation for Coal Measure Gas Co-Production, Taiyuan 030032, China
LAI Peng, Xinjiang Yaxin Coalbed Methane Investment and Development (Group) Co., Ltd., Urumqi 830009, China
LIAO Zhengkai, Xinjiang Yaxin Coalbed Methane Investment and Development (Group) Co., Ltd., Urumqi 830009, China
XIAN Bao'an, School of Resources and Environment, Henan Polytechnic University, Jiaozuo 454003, China; Henan International Joint Laboratory for Unconventional Energy Geology and Development, Jiaozuo 454003, China
BI Yansen, School of Resources and Environment, Henan Polytechnic University, Jiaozuo 454003, China; Henan International Joint Laboratory for Unconventional Energy Geology and Development, Jiaozuo 454003, ChinaFollow

Abstract

Objective and Methods Coalbed methane (CBM) horizontal wells face challenges such as sand accumulation in completion strings, pipe wall scaling, and pump sticking, leading to declined CBM production or shutdown of these wells. This severely restricts continuous, stable CBM production. Removing pulverized coals and sands from wellbores through mechanical sand bailing is recognized as an effective technique to restore and improve the CBM production of horizontal wells. To address challenges such as poor string sealing performance, low efficiency, and sand consolidation in mechanical sand bailing, this study created optimized tools including claw-shaped scraper tips, sand-breaking drill bits, eccentric flaps, and mechanical rotating tools. By introducing hydraulic additional axial force into the mechanical model of the sand bailing string based on the working principle of pumps for mechanical sand bailing in horizontal wells, this study established a string-hydraulic coupling mechanical model. Accordingly, this study proposed a method for optimizing sand bailing operation parameters. Through engineering application, this study analyzed the impacts of the single-stroke reciprocating cycle of the sand bailing pump on the fluid flow velocity in sand storage pipes and pulverized coal migration, as well as the impact of the opening degree of the flap’s suction port on hydraulic additional axial force. Additionally, this study compared and analyzed the axial forces calculated using the string- hydraulic coupling model and a conventional mechanical model. Results and Conclusions The results indicate that claw-shaped scraper tips improve sand-breaking efficiency at the horizontal well bottom through structural optimization. The mechanical rotating tool, combined with sand-breaking drill bits and clip springs, effectively addresses the challenge of consolidated sand removal. Furthermore, the eccentric flap and ball-type check valve enhance the area of solid-liquid phases flowing through the flap and the string sealing performance. Under a single-stroke reciprocating cycle of 60 s, the ø110-mm sand bailing pump can transport coal debris with particles diameters ≤ 2.5 mm and a small quantity of coal debris with particle sizes ranging from 3 mm to 12 mm, thus effectively transporting pulverized coals accumulating within wellbores into sand storage pipes. Compared to the conventional tripping, the axial forces of the sand bailing string increased by 906.94 N and decreased by 37.41 N, respectively under upward/downward conditions of the sand bailing pump, suggesting improved calculation accuracy of forces applied to the string. Field applications to 10 horizontal wells in the Qinshui Basin demonstrated that optimized tools and technologies increased single-well and per-operation sand bailing volumes by 1.5 times and 0.9 times, respectively, with the gas and water production rising by 1 483.7 m³/d and 2.18 m³/d, respectively. The optimized tools and technologies provide technical support for stable high-yield CBM horizontal wells. They apply to horizontal and highly deviated wells with screen or perforated casing completions in coal seams at medium-to-shallow depths, holding great practical significance for efficient CBM exploitation.

Keywords

coalbed methane (CBM), horizontal well, sand bailing tools, string-hydraulic coupling model, engineering application

DOI

10.12363/issn.1001-1986.24.11.0711

Recommended Citation

ZHANG Fei, WANG Yibing, CHENG Lu, et al. (2025) "Optimization and application of sand bailing technology for coalbed methane horizontal wells," Coal Geology & Exploration: Vol. 53: Iss. 3, Article 19.
DOI: 10.12363/issn.1001-1986.24.11.0711
Available at: https://cge.researchcommons.org/journal/vol53/iss3/19

Reference

[1] GAO Deli，BI Yansen，XIAN Bao’an. Technical advances in well type and drilling & completion for high–efficient development of coalbed methane in China[J]. Natural Gas Industry B，2022，9(6)：561−577.

[2] 鲜保安，高德利，徐凤银，等. 中国煤层气水平井钻完井技术研究进展[J]. 石油学报，2023，44(11)：1974−1992.

XIAN Bao’an，GAO Deli，XU Fengyin，et al. Research progress of coalbed methane horizontal well drilling and completion technology in China[J]. Acta Petrolei Sinica，2023，44(11)：1974−1992.

[3] XU Fengyin，HOU Wei，XIONG Xianyue，et al. The status and development strategy of coalbed methane industry in China[J]. Petroleum Exploration and Development，2023，50(4)：765−783.

[4] 徐凤银，闫霞，李曙光，等. 鄂尔多斯盆地东缘深部(层)煤层气勘探开发理论技术难点与对策[J]. 煤田地质与勘探，2023，51(1)：115−130.

XU Fengyin，YAN Xia，LI Shuguang，et al. Theoretical and technological difficulties and countermeasures of deep CBM exploration and development in the eastern edge of Ordos Basin[J]. Coal Geology & Exploration，2023，51(1)：115−130.

[5] XIAN Bao’an，LIU Gaofeng，BI Yansen，et al. Coalbed methane recovery enhanced by screen pipe completion and jet flow washing of horizontal well double tubular strings[J]. Journal of Natural Gas Science and Engineering，2022，99：104430.

[6] 鲜保安，张龙，哈尔恒·吐尔松，等. 煤层气储层伤害机理与水平井双层管柱筛管完井技术[J]. 煤田地质与勘探，2022，50(9)：122−129.

XIAN Bao’an，ZHANG Long，HA ERHENG·Tu’ersong，et al. Damage mechanism of CBM reservoirs and double–layered screen pipes in the horizontal well completion[J]. Coal Geology & Exploration，2022，50(9)：122−129.

[7] 毕延森，鲜保安，张晓斌. 煤层气水平井玻璃钢筛管完井工艺技术[J]. 煤炭科学技术，2016，44(5)：106−111.

BI Yansen，XIAN Bao’an，ZHANG Xiaobin. Fiber reinforced plastic screen pipe completion technology of coalbed methane horizontal well[J]. Coal Science and Technology，2016，44(5)：106−111.

[8] 杨睿月，黄中伟，李根生，等. 煤层气水平井水力喷射分段造穴技术探索[J]. 煤炭学报，2022，47(9)：3284−3297.

YANG Ruiyue，HUANG Zhongwei，LI Gensheng，et al. Investigation of hydraulic jet multistage cavity completion in coalbed methane horizontal wells[J]. Journal of China Coal Society，2022，47(9)：3284−3297.

[9] 毕延森，高德利，鲜保安. 煤层气水平井筛管密集分段径向射流增透方法[J]. 石油钻采工艺，2024，46(1)：119−129.

BI Yansen，GAO Deli，XIAN Bao’an. Dense segmented radial jetting stimulation method of screen tube in coalbed methane horizontal well[J]. Oil Drilling & Production Technology，2024，46(1)：119−129.

[10] 毕延森，鲜保安，石小磊，等. 超短半径水平井液压驱动非金属完井筛管下入长度计算[J]. 石油勘探与开发，2022，49(4)：818−827.

BI Yansen，XIAN Bao’an，SHI Xiaolei，et al. The extending length calculation of hydraulic drive non–metallic completion screen pipe running into ultra–short radius horizontal well[J]. Petroleum Exploration and Development，2022，49(4)：818−827.

[11] 毕延森，鲜保安，高德利. 煤层气T型水平井柔性筛管泵送下入技术研究[J]. 煤炭科学技术，2019，47(11)：170−175.

BI Yansen，XIAN Bao’an，GAO Deli. Study on technology of flexible screen running for T–shaped CBM wells with pumping method[J]. Coal Science and Technology，2019，47(11)：170−175.

[12] 陈振宏，王一兵，孙平. 煤粉产出对高煤阶煤层气井产能的影响及其控制[J]. 煤炭学报，2009，34(2)：229−232.

CHEN Zhenhong，WANG Yibing，SUN Ping. Destructive influences and effectively treatments of coal powder to high rank coalbed methane production[J]. Journal of China Coal Society，2009，34(2)：229−232.

[13] 刘春花，刘新福，周超. 煤层气井排采过程中煤粉运移规律研究[J]. 煤田地质与勘探，2015，43(5)：23−26.

LIU Chunhua，LIU Xinfu，ZHOU Chao. Migration patterns of coal powder in coal reservoirs during the well drainage[J]. Coal Geology & Exploration，2015，43(5)：23−26.

[14] 曹立虎，张遂安，张亚丽，等. 煤层气水平井煤粉产出及运移特征[J]. 煤田地质与勘探，2014，42(3)：31−35.

CAO Lihu，ZHANG Sui’an，ZHANG Yali，et al. Investigation of coal powder generation and migration characteristics in coalbed methane horizontal well[J]. Coal Geology & Exploration，2014，42(3)：31−35.

[15] 陶树，汤达祯，许浩，等. 沁南煤层气井产能影响因素分析及开发建议[J]. 煤炭学报，2011，36(2)：194−198.

TAO Shu，TANG Dazhen，XU Hao，et al. Analysis on influence factors of coalbed methane wells productivity and development proposals in southern Qinshui Basin[J]. Journal of China Coal Society，2011，36(2)：194−198.

[16] 魏迎春，孟涛，张劲，等. 不同煤体结构煤储层与煤层气井产出煤粉特征的关系：以鄂尔多斯盆地东缘柳林区块为例[J]. 石油学报，2023，44(6)：1000−1014.

WEI Yingchun，MENG Tao，ZHANG Jin，et al. Relationship between coal reservoirs with different coal structures and the characteristics of coal fines produced in CBM wells：A case study of Liulin Block at the eastern margin of Ordos Basin[J]. Acta Petrolei Sinica，2023，44(6)：1000−1014.

[17] 宋彦武. 连续冲砂工艺技术的开发与应用[J]. 石油机械，2004，32(8)：40−42.

SONG Yanwu. Development and application of continuous sand washing technology[J]. China Petroleum Machinery，2004，32(8)：40−42.

[18] 孙永壮，杜丙国，邵宣涛. 机械捞砂工艺研究[J]. 石油学报，2006，27(6)：125−127.

SUN Yongzhuang，DU Bingguo，SHAO Xuantao. Research on mechanical sand–bailing technology[J]. Acta Petrolei Sinica，2006，27(6)：125−127.

[19] 张晓飞，刘征，王德桂，等. 煤层气水平井低伤害负压捞砂工艺[J]. 煤炭技术，2020，39(12)：32−34.

ZHANG Xiaofei，LIU Zheng，WANG Degui，et al. Low damage negative pressure sand bailing technology for CBM horizontal wells[J]. Coal Technology，2020，39(12)：32−34.

[20] 朱焕玺. L型煤层气水平井捞砂技术的研究与应用[J]. 中国煤层气，2020，17(6)：9−11.

ZHU Huanxi. Research and application of sand bailing technology in L–type coalbed methane horizontal wells[J]. China Coalbed Methane，2020，17(6)：9−11.

[21] 郑瑞波. 井口传扭式钻进捞砂工艺的研究与应用[J]. 石油机械，2015，43(4)：109−113.

ZHENG Ruibo. Development and application of the wellhead torque–transmitting bailing–while–drilling techniques[J]. China Petroleum Machinery，2015，43(4)：109−113.

[22] 张永红，李玉魁，葛东. 煤层气井机械捞砂技术[J]. 中国煤层气，2005，2(1)：22−23.

ZHANG Yonghong，LI Yukui，GE Dong. Mechanical sand fishing technology in coalbed methane well[J]. China Coalbed Methane，2005，2(1)：22−23.

[23] 屈建红，倪拥军，刘杰. 煤层气水平井旋塞式捞砂工艺技术及现场应用[J]. 石化技术，2022，29(4)：6−7.

QU Jianhong，NI Yongjun，LIU Jie. Plug sand bailing technology and its field application in CBM horizontal wells[J]. Petrochemical Industry Technology，2022，29(4)：6−7.

[24] WU Jiang，JUVKAM–WOLD H C. Coiled tubing buckling implication in drilling and completing horizontal wells[J]. SPE Drilling & Completion，1995，10(1)：16−21.

[25] WU Jiang，JUVKAM–WOLD H C. The effect of wellbore curvature on tubular buckling and lockup[J]. Journal of Energy Resources Technology，1995，117(3)：214−218.

[26] WU J，JUVKAM–WOLD H C，LU R. Preventing helical buckling of pipes in extended reach and horizontal wells[C]//American Society Mechanical Engineers. Energy–Sources Technology Conference. Houston：1993.

[27] 张好林，李根生，王伟，等. 水平井井筒清洁临界流速简化模型[J]. 钻采工艺，2014，37(4)：5−8.

ZHANG Haolin，LI Gensheng，WANG Wei，et al. Simplified model of critical fluid velocity for hole cleaning of horizontal well[J]. Drilling & Production Technology，2014，37(4)：5−8.

[28] BI Yansen，GAO Deli，XIAN Bao’an. The maximum installation depth for a pre–drilled liner with floating inner tubing in horizontal well in tectonically deformed coal seams[J]. International Journal of Oil，Gas and Coal Technology，2024，35(2)：159−181.

[29] 高德利，刘希圣，徐秉业. 井眼轨迹控制[M]. 东营：石油大学出版社，1994.

[30] 樊洪海. 实用钻井流体力学[M]. 北京：石油工业出版社，2014.

[31] GALLEGO F，SHAH S N. Friction pressure correlations for turbulent flow of drag reducing polymer solutions in straight and coiled tubing[J]. Journal of Petroleum Science and Engineering，2009，65(3/4)：147−161.

[32] 沈忠厚. 水射流理论与技术[M]. 东营：石油大学出版社，1998.

[33] 赵泽，孔鹏，张浩亮，等. 煤层气井煤粉产出规律特征及主控因素研究[J]. 中国煤层气，2024，21(3)：12−15.

ZHAO Ze，KONG Peng，ZHANG Haoliang，et al. Research on characteristics and main control factors of coal powder production in coalbed methane wells[J]. China Coalbed Methane，2024，21(3)：12−15.

[34] BI Yansen，GAO Deli，XIAN Bao’an. The maximum installation depth for a pre-drilled liner with floating inner tubing in horizontal well in tectonically deformed coal seams. International Journal of Oil，Gas and Coal Technology，2024，35(2)：159–181.