Exploring dynamic parameters and tooth structure of self-propelled borehole repairing drill bits

Authors

LIU Yong, State Key Laboratory Cultivation Base for Gas Geology and Gas Control, Henan Polytechnic University, Jiaozuo 454000, China; State Collaborative Innovation Center of Coal Work Safety and Clean-efficiency Utilization, Henan Polytechnic University, Jiaozuo 454000, ChinaFollow
LI Yang, State Key Laboratory Cultivation Base for Gas Geology and Gas Control, Henan Polytechnic University, Jiaozuo 454000, China; State Collaborative Innovation Center of Coal Work Safety and Clean-efficiency Utilization, Henan Polytechnic University, Jiaozuo 454000, China
WEI Jianping, State Key Laboratory Cultivation Base for Gas Geology and Gas Control, Henan Polytechnic University, Jiaozuo 454000, China; State Collaborative Innovation Center of Coal Work Safety and Clean-efficiency Utilization, Henan Polytechnic University, Jiaozuo 454000, China
YUAN Yongwang, State Key Laboratory Cultivation Base for Gas Geology and Gas Control, Henan Polytechnic University, Jiaozuo 454000, China; State Collaborative Innovation Center of Coal Work Safety and Clean-efficiency Utilization, Henan Polytechnic University, Jiaozuo 454000, China
DAI Shuo, State Key Laboratory Cultivation Base for Gas Geology and Gas Control, Henan Polytechnic University, Jiaozuo 454000, China; State Collaborative Innovation Center of Coal Work Safety and Clean-efficiency Utilization, Henan Polytechnic University, Jiaozuo 454000, China
LI Linyu, State Key Laboratory Cultivation Base for Gas Geology and Gas Control, Henan Polytechnic University, Jiaozuo 454000, China; State Collaborative Innovation Center of Coal Work Safety and Clean-efficiency Utilization, Henan Polytechnic University, Jiaozuo 454000, China

Abstract

Self-propelled borehole repairing drill bits provide an effective technique for repairing long boreholes that have failed. In order to further improve the borehole repair speed and gas drainage efficiency, based on the theory of jet recoil, the relationship between the jet recoil force and nozzle parameters was analyzed, and a theoretical model was established for rotational mechanics of self-propelled borehole repairing drill bits. Subsequently, the coal-breaking processes of drill bits with different tooth structures were simulated using LS-DYNA, the failure modes in coal mass broken by cutting teeth and the rules of variation in the volume of coal broken by cutting teeth (coal-breaking volume) were analyzed under different drilling force and torque conditions, and coal-breaking experiments were conducted to verify the numerical simulation results. In addition, a method for determining the parameters of self-propelled borehole repairing drill bits was established, and a self-propelled borehole repairing drill bit was designed and used in the methane drainage roadway at the working face of No.22 Coal Pillar in Chaohua Coal Mine (Zhengzhou Coal Industry (Group) Co., Ltd.) for experimental purposes. The results show that (1) the nozzle opening angle (α) and eccentric angle (β) are key parameters that determine the distribution of drilling force and torque, and the optimal distribution of drilling force and torque can therefore be achieved by adjusting these two parameters. (2) Under the same drilling conditions/parameters, tooth structure has a great impact on the coal-breaking volume, stepped teeth have the best coal-breaking performance, and when the drilling force is 120 N and the torque is 0.6 N·m, a drill bit with stepped teeth can achieve the optimal distribution of drilling force and torque. (3) The optimal parameters determined for borehole repair drill bits are as follows: drill bit OD (outer diameter): 28 mm; opening angle of rear nozzles: 20°; eccentric angle of rear nozzles: 90°; opening angle of front nozzles: 90°; eccentric angle of front nozzles: 0°. (4) The results of engineering applications show that the scalar drainage rate, gas concentration and borehole repair speed have been increased by 1.96 times, 3.98 times and 1.2 times, respectively. By improving the dynamic parameters of the drill bit and optimizing the structure of the drill teeth, The self-propelled borehole repair drill bit designed with optimized dynamic parameters and tooth structure has improved the borehole repair speed and gas extraction efficiency in engineering practice.

Keywords

gas drainage, borehole repair, drilling force, tooth structure, coal mine

DOI

10.12363/issn.1001-1986.23.08.0507

Recommended Citation

LIU Yong, LI Yang, WEI Jianping, et al. (2024) "Exploring dynamic parameters and tooth structure of self-propelled borehole repairing drill bits," Coal Geology & Exploration: Vol. 52: Iss. 4, Article 19.
DOI: 10.12363/issn.1001-1986.23.08.0507
Available at: https://cge.researchcommons.org/journal/vol52/iss4/19

Reference

[1] 周斌,郝晋伟,张春华. 松软煤层瓦斯钻孔失稳分析及动态密封技术[J]. 煤田地质与勘探,2016,44(4):161−166

ZHOU Bin,HAO Jinwei,ZHANG Chunhua. Analysis on borehole instability under coupled multiple stress and dynamic sealing technology in soft coal seam[J]. Coal Geology & Exploration,2016,44(4):161−166

[2] 杨恒,魏建平,蔡玉波,等. 后混合磨料空气射流喷嘴结构优化及破煤效果研究[J]. 煤田地质与勘探,2023,51(2):114−126

YANG Heng,WEI Jianping,CAI Yubo,et al. Structure optimization and coal breaking effect of air jet nozzle for post–mixed abrasive[J]. Coal Geology & Exploration,2023,51(2):114−126

[3] 王耀锋,何学秋,王恩元,等. 水力化煤层增透技术研究进展及发展趋势[J]. 煤炭学报,2014,39(10):1945−1955

WANG Yaofeng,HE Xueqiu,WANG Enyuan,et al. Research progress and development tendency of the hydraulic technology for increasing the permeability of coal seams[J]. Journal of China Coal Society,2014,39(10):1945−1955

[4] 张超,延婧,李树刚,等. 瓦斯抽采钻孔动态密封黏液型材料实验研究[J]. 采矿与安全工程学报,2022,39(5):1033−1040

ZHANG Chao,YAN Jing,LI Shugang,et al. Experimental study on dynamic sealing of mucilage material in gas extraction borehole[J]. Journal of Mining & Safety Engineering,2022,39(5):1033−1040

[5] 刘勇,戴彪,魏建平,等. 水射流卸压增透钻孔布置优化分析[J]. 中国安全生产科学技术,2016,12(3):21−25

LIU Yong,DAI Biao,WEI Jianping,et al. Analysis on layout optimization of borehole for pressure relief and permeability improvement by water jet[J]. Journal of Safety Science and Technology,2016,12(3):21−25

[6] 丁洋,朱冰,李树刚,等. 高突矿井采空区卸压瓦斯精准辨识及高效抽采[J]. 煤炭学报,2021,46(11):3565−3577

DING Yang,ZHU Bing,LI Shugang,et al. Accurate identification and efficient drainage of relieved methane in goaf of high outburst mine[J]. Journal of China Coal Society,2021,46(11):3565−3577

[7] 张超林,王恩元,王奕博,等. 近20年我国煤与瓦斯突出事故时空分布及防控建议[J]. 煤田地质与勘探,2021,49(4):134−141

ZHANG Chaolin,WANG Enyuan,WANG Yibo,et al. Spatial–temporal distribution of outburst accidents from 2001 to 2020 in China and suggestions for prevention and control[J]. Coal Geology & Exploration,2021,49(4):134−141

[8] 刘勇,代硕,魏建平,等. 低压磨料空气射流破硬岩规律及特征实验研究[J]. 岩石力学与工程学报,2022,41(6):1172−1182

LIU Yong,DAI Shuo,WEI Jianping,et al. Experimental study on hard rock breaking laws and characteristics by low–pressure abrasive air jet[J]. Chinese Journal of Rock Mechanics and Engineering,2022,41(6):1172−1182

[9] 苏现波,刘晓,马保安,等. 瓦斯抽采钻孔修复增透技术与装备[J]. 煤炭科学技术,2014,42(6):58−60

SU Xianbo,LIU Xiao,MA Baoan,et al. Repairing and enhancing permeability technology and equipment of gas drainage borehole[J]. Coal Science and Technology,2014,42(6):58−60

[10] 张士岭,和树栋. 瓦斯压力对煤体应力及失稳破坏特性影响分析[J]. 采矿与安全工程学报,2022,39(4):847−856

ZHANG Shiling,HE Shudong. Analysis of the influence of gas pressure on coal stress and instability failure characteristics[J]. Journal of Mining & Safety Engineering,2022,39(4):847−856

[11] 刘勇,梁博臣,何岸,等. 自进式旋转钻头钻孔修复理论及关键参数研究[J]. 中国安全生产科学技术,2016,12(2):39−44

LIU Yong,LIANG Bochen,HE An,et al. Research on theory and technical parameter of borehole restoration for self–propelling and rotating drill[J]. Journal of Safety Science and Technology,2016,12(2):39−44

[12] 石智军,董书宁,姚宁平,等. 煤矿井下近水平随钻测量定向钻进技术与装备[J]. 煤炭科学技术,2013,41(3):1−6

SHI Zhijun,DONG Shuning,YAO Ningping,et al. Technology and equipment of horizontal measuring directional drilling in underground coal mine[J]. Coal Science and Technology,2013,41(3):1−6

[13] 沈荷莲,刘勇,魏建平,等. 自激振荡脉冲超临界二氧化碳射流冲击频率变化规律[J]. 石油勘探与开发,2023,50(5):1097−1104

SHEN Helian,LIU Yong,WEI Jianping,et al. Impact frequency variation of self–excited oscillation pulsed supercritical carbon dioxide jets[J]. Petroleum Exploration and Development,2023,50(5):1097−1104

[14] 杨博凯. 煤层自进式旋转钻头的设计与实验研究[D]. 重庆：重庆大学，2010.

YANG Bokai. Design and research on self–propelling and rotating drill for coal seam[D]. Chongqing：Chongqing University，2010.

[15] 杨博凯,卢义玉,杨晓峰,等. 煤层自进式水射流钻头优化设计及实验研究[J]. 机械,2011,38(1):6−11

YANG Bokai,LU Yiyu,YANG Xiaofeng,et al. Design and research of self–propelled nozzle worked in coal seam with water jet[J]. Machinery,2011,38(1):6−11

[16] 刘勇,代硕,魏建平,等. 自进式旋转钻头钻孔修复运动方程及关键参数研究[J]. 河南理工大学学报 (自然科学版),2023,42(3):1−9

LIU Yong,DAI Shuo,WEI Jianping,et al. Study on motion equations and technical parameters of borehole restoration for self–propelling drill[J]. Journal of Henan Polytechnic University (Natural Science),2023,42(3):1−9

[17] 刘勇,代硕,魏建平,等. 水射流自驱钻头自进能力影响因素研究[J]. 煤田地质与勘探,2023,51(5):198−206

LIU Yong,DAI Shuo,WEI Jianping,et al. Study on factors influencing the self–propelling capacity of self–propelled water jet drill bits[J]. Coal Geology & Exploration,2023,51(5):198−206

[18] 刘力红,张东速. 自进式旋转射流钻孔的自进运动分析[J]. 长春理工大学学报 (自然科学版),2012,35(4):94−97

LIU Lihong,ZHANG Dongsu. Self–propelled motion analysis of self–propelled whirling water jet[J]. Journal of Changchun University of Science and Technology (Natural Science Edition),2012,35(4):94−97

[19] 温志辉,苑永旺,张铁岗,等. 水力联合机械钻头修复失效钻孔方法及参数[J]. 中国矿业大学学报,2023,52(3):527−539

WEN Zhihui,YUAN Yongwang,ZHANG Tiegang,et al. Method and parameters of hydraulic–driven mechanical drill for repairing the invalid gas extraction borehole[J]. Journal of China University of Mining & Technology,2023,52(3):527−539

[20] LIU Songyong,CHANG Huanhuan,LI Hongsheng,et al. Numerical and experimental investigation of the impact fragmentation of bluestone using multi–type bits[J]. International Journal of Rock Mechanics and Mining Sciences,2017,91:18−28.

[21] KARASAWA H,OHNO T,MIYAZAKI K,et al. Experimental results on the effect of bit wear on torque response[J]. International Journal of Rock Mechanics and Mining Sciences,2016,84:1−9.

[22] 解北京,赵泽明,徐晓萌,等. 含瓦斯煤锤击破坏HJC本构模型及数值模拟[J]. 煤炭学报,2018,43(10):2789−2799

XIE Beijing,ZHAO Zeming,XU Xiaomeng,et al. HJC constitutive model and numerical simulation of hammer damage with gas–containing coal[J]. Journal of China Coal Society,2018,43(10):2789−2799

[23] 代硕. 水力自驱钻头钻孔修复关键参数理论与实验研究[D]. 焦作：河南理工大学，2023.

DAI Shuo. Theoretical and experimental study on key parameters of boreholes repair with hydraulic self–propelled drill bits[D]. Jiaozuo：Henan Polytechnic University，2023.