Coal Geology & Exploration
Abstract
Three-dimensional geological modeling can intuitively and visually evaluate the effect of coalbed methane(CBM) dynamic drainage, and provide guidance for subsequent adjustments to development plans. With the help of 3D geological modeling software, No.3 Coal Seam of west-second panel is taken as the research object. A geological model that can reflect the spatial geometric changes and structural characteristics of coal seams, and the dynamic changes of coal reservoir attribute parameters is established based on the analysis of geological and productivity data and numerical simulation, to realize the dynamic evaluation of the CBM extraction effect in the study area. The constructed three-dimensional geological model is used to predict important parameters such as gas production, reservoir pressure distribution, and remaining gas content. The results show that the average daily gas production predicted in different drainage cycles of the CBM wells in Sihe Mine will gradually decrease, and the scope of influence will gradually expand. The average reservoir pressure in the study area will drop from 1.31 MPa in 2010 to 0.60 MPa in 2022, a decrease of 54% from 2010. The average remaining gas content in the study area will drop from 15.70 m3/t in 2010 to 5.65 m3/t in 2022. It provides a scientific basis for the application of the three-dimensional geological model in the effect evaluation of CBM extraction in a factual and objective way.
Keywords
three-dimensional geological model, static attribute model, dynamic attribute model, remaining gas content, extraction effect
DOI
10.12363/issn.1001-1986.21.07.0362
Recommended Citation
JIANG Zaibing, YANG Jianchao, LI Yong,
et al.
(2022)
"Evaluation of coalbed methane extraction effect based on 3D geological modeling technology: An example of Sihe Mine in Jincheng City,"
Coal Geology & Exploration: Vol. 50:
Iss.
2, Article 8.
DOI: 10.12363/issn.1001-1986.21.07.0362
Available at:
https://cge.researchcommons.org/journal/vol50/iss2/8
Reference
[1] YARUS J M,CHAMBERS R L. 随机建模和地质统计学:原理、方法和实例研究[M]. 北京:石油工业出版社,2000.
[2] 桂阿娟. 三维地质建模技术在储层研究中的应用[J]. 价值工程,2016,35(26):209−211. GUI Ajuan. Application of 3D geologic modeling technique in reservoir research[J]. Value Engineering,2016,35(26):209−211.
[3] 鲁卡·考森蒂偌. 油藏评价一体化研究[M]. 北京:石油工业出版社,2003.
[4] 王武学,赵家宏,刘军,等. 三维地质建模技术在大布苏地区花29区块的应用[J]. 石油天然气学报(江汉石油学院学报),2010,32(2):191−194. WANG Wuxue,ZHAO Jiahong,LIU Jun,et al. Application of 3D geological modeling technology in Hua 29 block in Dabusu area[J]. Journal of Oil and Gas Technology,2010,32(2):191−194.
[5] 瞿建华,王新海,秦可,等. LN 油田2井区三叠系储层三维建模技术研究[J]. 特种油气藏,2006,13(4):20−23. QU Jianhua,WANG Xinhai,QIN Ke,et al. 3D modeling of Triassic reservoir in Wellblock 2 of LN Oilfield[J]. Special Oil & Gas Reservoirs,2006,13(4):20−23.
[6] 王晓梅,张群,张培河,等. 煤层气储层数值模拟研究的应用[J]. 天然气地球科学,2004,15(6):664−668. WANG Xiaomei,ZHANG Qun,ZHANG Peihe,et al. Application of coalbed methane reservoir simulation[J]. Natural Gas Geoscience,2004,15(6):664−668.
[7] 张亚蒲,张冬丽,杨正明,等. 煤层气定向羽状水平井数值模拟技术应用[J]. 天然气工业,2006,26(12):115−117. ZHANG Yapu,ZHANG Dongli,YANG Zhengming,et al. The application of pinnate horizontal multilateral well numerical simulation technology[J]. Natural Gas Industry,2006,26(12):115−117.
[8] 闫岩. 沁南区块煤层气数值模拟及开发方案研究[D]. 大庆:东北石油大学,2015.
YAN Yan. The study on numerical simulation and development scheme of coalbed gas in Qin South Block[D]. Daqing:Northeast Petroleum University,2015.
[9] 降文萍. 地面煤层气开发残余气含量研究[R]. 西安:煤炭科学研究总院西安研究院,2011.
[10] 李国富,李贵红,刘刚. 晋城矿区典型区煤层气地面抽采效果分析[J]. 煤炭学报,2014,39(9):1932−1937. LI Guofu,LI Guihong,LIU Gang. Analysis on the ground extraction effect of coal–bed methane at typical area in Jincheng,China[J]. Journal of China Coal Society,2014,39(9):1932−1937.
[11] 陈博. 保德Ⅰ单元煤储层三维地质建模及动态特征分析[D]. 北京:中国地质大学(北京),2020.
CHEN Bo. Three−dimensional geological modeling and dynamic characteristic analysis of coal reservoir in Baode unit Ⅰ[J]. Beijing:China University of Geosciences(Beijing),2020.
[12] TANG Shuling,TANG Dazhen,LI Song,et al. Fracture system identification of coal reservoir and the productivity differences of CBM wells with different coal structures:A case in the Yanchuannan block,Ordos Basin[J]. Journal of Petroleum Science and Engineering,2018,161:175−189.
[13] 周优,张松航,唐书恒,等. 柿庄南区块3号煤层含气量三维建模[J]. 煤田地质与勘探,2020,48(1):96−104. ZHOU You,ZHANG Songhang,TANG Shuheng,et al. Gas content modeling of No.3 coal seam in district 3 of southern Shizhuang Block[J]. Coal Geology & Exploration,2020,48(1):96−104.
[14] 潘结南,孟召平,甘莉. 矿山三维地质建模与可视化研究[J]. 煤田地质与勘探,2005,33(1):16−18. PAN Jienan,MENG Zhaoping,GAN Li. Study on 3D geoscience modeling and visualization of mines[J]. Coal Geology & Exploration,2005,33(1):16−18.
[15] 李世临,李爽,张文济,等. 精细三维地质建模方法在川东地区石炭系气藏应用–以双家坝区块为例[C]//中国石油学会,中国石油西南油气田公司2013年全国天然气学术年会论文集. 2013:547–553.
[16] 马国龙,张庆华,赵彬. 寺河煤矿煤与瓦斯突出主控因素分析及防治对策[J]. 煤炭科学技术,2014,42(3):49−52. MA Guolong,ZHANG Qinghua,ZHAO Bin. Analysis on major control factors of coal and gas outburst in Sihe mine and prevention countermeasures[J]. Coal Science and Technology,2014,42(3):49−52.
[17] 郑毅,刘爱平. 沁水盆地晋城地区煤层气田固井实践[J]. 石油钻采工艺,2000,22(3):20−22. ZHENGY Yi,LIU Aiping. Cementing practices in coalbed gas wells in Jincheng area of Qinshui Basin[J]. Oil Drilling & Production Technology,2000,22(3):20−22.
[18] 李贵红. 山西省沁水煤田晋城矿区寺河煤矿煤炭、煤层气资源储量核实报告[R]. 西安:煤炭科学研究总院西安研究院,2009.
[19] 陈晓阳,石洪福,杜鹏. 煤层气数值模拟及应用研究[J]. 中国煤层气,2012,9(1):37−39. CHEN Xiaoyang,SHI Hongfu,DU Peng. CBM numerical simulation and its application and study[J]. China Coalbed Methane,2012,9(1):37−39.
[20] 秦学成,段永刚,谢学恒,等. 煤层气井产气量控制因素分析[J]. 西南石油大学学报(自然科学版),2012,34(2):99−104. QIN Xuecheng,DUAN Yonggang,XIE Xueheng,et al. Controlling factor analysis of gas production rate in coal bed gas well[J]. Journal of Southwest Petroleum University(Science & Technology Edition),2012,34(2):99−104.
[21] 陈国良,朱良峰,刘修国. 三维地质断层结构模型的构建技术及方法[J]. 信阳师范学院学报(自然科学版),2007,20(2):248−251. CHEN Guoliang,ZHU Liangfeng,LIU Xiuguo. Technology and method for building 3D geological fault structure model[J]. Journal of Xinyang Normal University(Natural Science Edition),2007,20(2):248−251.
[22] 朱良峰,陈国良,吴信才,等. 基于线框架模型的三维地质断层结构模型及其构建技术[J]. 地学前缘,2007,14(2):276−282. ZHU Liangfeng,CHEN Guoliang,WU Xincai,et al. 3D geological fault model and its construction based on wire frame model[J]. Earth Science Frontiers,2007,14(2):276−282.
[23] 邹起阳,阎振华,徐阳东,等. 应用Petrel进行构造建模的研究[J]. 长江大学学报(自然科学版),2011,8(2):62−64. ZOU Qiyang,YAN Zhenhua,XU Yangdong,et al. Structure modeling using Petrel software[J]. Journal of Yangtze University(Natural Science Edition),2011,8(2):62−64.
[24] 张争争,王学平. 地质统计学中变差函数在矿产勘探中的应用[C]//中国地质学会数学地质和地学信息专业委员会、国家自然科学基金委员会地球科学部、中国地质调查局科技外事部、新疆维吾尔地质矿产勘查开发局. 第十二届全国数学地质与地学信息学术研讨会论文集. 中国地质学会数学地质和地学信息专业委员会、国家自然科学基金委员会地球科学部、中国地质调查局科技外事部、新疆维吾尔地质矿产勘查开发局:中国科学院新疆生态与地理研究所,2013:251–258.
[25] 刘占宁,宋宇辰,孟海东,等. 序贯高斯模拟在矿石品位估计中的应用研究[J]. 地质找矿论丛,2018,33(1):149−155. LIU Zhanning,SONG Yuchen,MENG Haidong,et al. Application of sequential Gaussian simulation in ore grade estimation[J]. Contributions to Geology and Mineral Resources Research,2018,33(1):149−155.
Included in
Earth Sciences Commons, Mining Engineering Commons, Oil, Gas, and Energy Commons, Sustainability Commons