Experimental study on high-pressure hydraulic percussive rotary drilling based on single-tooth rock-breaking process

Authors

DOU Xuqian, China Coal Research Institute, Beijing 100013, China; Xi’an Research Institute (Group) Co. Ltd., China Coal Technology and Engineering Group Corp., Xi’an 710077, ChinaFollow
YAO Ningping, China Coal Research Institute, Beijing 100013, China; Xi’an Research Institute (Group) Co. Ltd., China Coal Technology and Engineering Group Corp., Xi’an 710077, ChinaFollow
LI Xiushan, Geological Exploration Engineering Branch of Huainan Mining (Group) Co., Ltd., Huainan 232052, China
WANG Li, China Coal Research Institute, Beijing 100013, China; Xi’an Research Institute (Group) Co. Ltd., China Coal Technology and Engineering Group Corp., Xi’an 710077, China
ZHANG Kai, Geological Exploration Engineering Branch of Huainan Mining (Group) Co., Ltd., Huainan 232052, China
WEI Hongchao, China Coal Research Institute, Beijing 100013, China; Xi’an Research Institute (Group) Co. Ltd., China Coal Technology and Engineering Group Corp., Xi’an 710077, China

Abstract

Aiming at the problem of low efficiency of hard rock drilling in crossing borehole in underground coal mine, the morphology of crushing pit formed by column tooth under the percussive load was analyzed based on the percussive rotary drilling mechanism and the main characteristics of Wassara high-pressure hydraulic impactor, and the crushing pit was divided into the four areas of disintegration area, compact area, crack area and elastic area. On this basis, process analysis was performed on the continuous tooth rock-breaking with large and small interval impact. Meanwhile, the technical parameters of high-pressure hydraulic percussive rotary drilling were discussed with reference to the field test conditions of Huainan Pansan Mine. The drilling rig, impactor, drill pipe, drill bit and clean water pump for high-pressure hydraulic percussive rotary drilling were selected preferably, for which the main technical parameters were given. The test results show that the average rate of penetration of high-pressure hydraulic percussive rotary drilling is 24.67 m/h at the clean water pressure above 15 MPa, which is about 1.9 times higher than that of 8.48 m/h without adopting this technology. Besides, the linear relationship between the rate of penetration and water pressure is obtained by regression analysis fitting. According to the F-test of mathematical statistics, the regression results are verified to be significant with F=8.82>F_0.05(1,7) and the correlation coefficient, and the rate of penetration increases linearly with the increase of water pressure. Generally, the high-pressure hydraulic percussive rotary drilling technology could effectively improve the drilling efficiency of hard rock borehole in underground coal mine and ensure the safe and efficient production of coal mine.

Keywords

single-tooth rock-breaking, continuous rock breaking, high-pressure hydraulic impactor, percussive rotary drilling, hard rock drilling

DOI

10.12363/issn.1001-1986.22.03.0165

Recommended Citation

DOU Xuqian, YAO Ningping, LI Xiushan, et al. (2022) "Experimental study on high-pressure hydraulic percussive rotary drilling based on single-tooth rock-breaking process," Coal Geology & Exploration: Vol. 50: Iss. 12, Article 18.
DOI: 10.12363/issn.1001-1986.22.03.0165
Available at: https://cge.researchcommons.org/journal/vol50/iss12/18

Reference

[1] 周红星,程远平,刘洪永,等. 突出煤层穿层钻孔孔群增透技术及应用[J]. 煤炭学报,2011,36(9):1515−1518

ZHOU Hongxing,CHENG Yuanping,LIU Hongyong,et al. Permeability improvement technology of array crossing boreholes and its application in outburst coal seam[J]. Journal of China Coal Society,2011,36(9):1515−1518

[2] 郭军杰,程晓阳,刘益文. 极薄煤层群顶板穿层钻孔瓦斯抽采技术研究[J]. 煤炭工程,2017,49(2):72−74

GUO Junjie,CHENG Xiaoyang,LIU Yiwen. Research on roof–cross borehole gas drainage method in ultra thin coal seam group[J]. Coal Engineering,2017,49(2):72−74

[3] 王兆丰,席杰,陈金生,等. 底板岩巷穿层钻孔一孔多用瓦斯抽采时效性研究[J]. 煤炭科学技术,2021,49(1):248−256

WANG Zhaofeng,XI Jie,CHEN Jinsheng,et al. Study on time effectiveness of gas drainage by crossing layer drilling in floor rock roadway with one hole and multi–purpose[J]. Coal Science and Technology,2021,49(1):248−256

[4] 姚宁平,王毅,姚亚峰,等. 我国煤矿井下复杂地质条件下钻探技术与装备进展[J]. 煤田地质与勘探,2020,48(2):1−7

YAO Ningping,WANG Yi,YAO Yafeng,et al. Progress of drilling technologies and equipments for complicated geological conditions in underground coal mines in China[J]. Coal Geology & Exploration,2020,48(2):1−7

[5] 姚宁平,姚亚峰,方鹏,等. 我国煤矿坑道钻探装备技术进展与展望[J]. 钻探工程,2021,48(1):81−87

YAO Ningping,YAO Yafeng,FANG Peng,et al. Advances and outlook of coal mine tunnel drilling equipment and technology[J]. Drilling Engineering,2021,48(1):81−87

[6] 豆旭谦. 煤矿井下穿层钻孔高效钻进方法[J]. 煤矿安全,2020,51(5):126−129

DOU Xuqian. High efficiency drilling methods for through beds hole in underground coal mine[J]. Safety in Coal Mines,2020,51(5):126−129

[7] 杨甘生. 冲击回转碎岩机理探讨[J]. 探矿工程 (岩土钻掘工程),2013,40(2):19−21

YANG Gansheng. Discussion on rock broken mechanism of percussive–rotary drilling[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling),2013,40(2):19−21

[8] 杨冬冬,赵江鹏,赵建国,等. 煤矿井下硬岩层快速成孔钻进技术与发展趋势[J]. 煤炭科学技术,2019,47(12):136−140

YANG Dongdong,ZHAO Jiangpeng,ZHAO Jianguo,et al. Fast drilling technology and development tendency of hard rock in underground coal mine[J]. Coal Science and Technology,2019,47(12):136−140

[9] 豆旭谦,金新,童碧,等. 气动潜孔锤在淮南潘三矿上仰穿层孔硬岩钻进中的应用[J]. 煤炭技术,2016,35(1):201−203

DOU Xuqian,JIN Xin,TONG Bi,et al. Application of pneumatic DTH hammer on hard rock drilling of upward layer–through borehole in Huainan Pansan coal mine[J]. Coal Technology,2016,35(1):201−203

[10] 刘卫亮. 气动冲击旋转钻进在煤矿硬岩钻进中的应用[J]. 煤矿机械,2019,40(2):128−129

LIU Weiliang. Application of pneumatic impact rotary drilling in hard rock drilling of coal mine[J]. Coal Mine Machinery,2019,40(2):128−129

[11] 杨冬冬,王四一. 多工艺冲击回转钻进技术在硬岩钻进中的应用[J]. 煤矿机械,2018,39(1):112−114

YANG Dongdong,WANG Siyi. Application of multi–technology impact and rotary drilling technology in hard rock drilling[J]. Coal Mine Machinery,2018,39(1):112−114

[12] 李彦明. 冲击–回转钻进工艺在超硬岩层中的应用[J]. 煤矿机械,2011,32(3):210−212

LI Yanming. Application of impact–rotary drilling technology in superhard rock[J]. Coal Mine Machinery,2011,32(3):210−212

[13] 唐大勇. 冲击–回转钻进在复杂岩层中的应用[J]. 煤矿机械,2013,34(6):201−202

TANG Dayong. Application of impact rotation drilling in complicated rock[J]. Coal Mine Machinery,2013,34(6):201−202

[14] 孙强,杨冬冬,彭枧明,等. 高能射流式液动锤在花岗岩中的钻进研究[J]. 探矿工程 (岩土钻掘工程),2016,43(8):39−43

SUN Qiang,YANG Dongdong,PENG Jianming,et al. Experimental research on high energy liquid–jet hammer in granite drilling[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling),2016,43(8):39−43

[15] 张鹏飞,葛东,程靖清,等. 高能射流式液动锤在赵固一矿井下穿层注浆钻孔中的应用[J]. 探矿工程 (岩土钻掘工程),2018,45(5):4−7

ZHANG Pengfei,GE Dong,CHENG Jingqing,et al. Application of high energy liquid–jet hydraulic hammer in layer–crossing grouting drilling Zhaogu mine–1 underground[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling),2018,45(5):4−7

[16] 豆旭谦,金新,童碧,等. 淮南矿区硬岩穿层钻孔钻进方法对比试验研究[J]. 煤炭科学技术,2018,46(11):151−156

DOU Xuqian,JIN Xin,TONG Bi,et al. Comparative experimental study on drilling methods of hard rock borehole passed through strata in Huainan mining area[J]. Coal Science and Technology,2018,46(11):151−156

[17] 张鑫鑫. 高能射流式液动锤理论与实验研究[D]. 长春：吉林大学，2017.

ZHANG Xinxin. Theoretical and experimental study on fluidic hammer with high impact energy[D]. Changchun：Jilin University，2017.

[18] 卢春华，肖冬顺，曾立新，等. 工程钻探与取样技术[M]. 武汉：中国地质大学出版社，2018.

[19] 蔡灿,伍开松,廉栋,等. 单齿冲击作用下破岩机制分析[J]. 岩土力学,2015,36(6):1659−1666

CAI Can,WU Kaisong,LIAN Dong,et al. Study of rock–breaking mechanism under single–tooth impact[J]. Rock and Soil Mechanics,2015,36(6):1659−1666

[20] 朱海燕,刘清友,邓金根,等. 冲旋钻井条件下的岩石破碎机理[J]. 应用基础与工程科学学报,2012,20(4):622−631

ZHU Haiyan,LIU Qingyou,DENG Jingen,et al. Rock–breaking mechanism of rotary–percussive drilling[J]. Journal of Basic Science and Engineering,2012,20(4):622−631