Design and analysis of hole-forming technology for surface large diameter emergency rescue borehole

Authors

HAO Shijun, China Coal Research Institute, Beijing 100013, China; Xi'an Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Xi'an 710077, China
MO Haitao, China Coal Research Institute, Beijing 100013, China; Xi'an Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Xi'an 710077, China

Abstract

Surface large diameter borehole can be used as the escape channel for trapped people underground, and it is one of the important emergency rescue plans when mine accidents cause people trapped underground. However, the conventional large-diameter engineering hole is mainly formed by mud positive circulation and multi-stage reaming, which can not meet the rescue requirements. Focusing on the purpose of rescue and escape of large-diameter hole, this paper expounds the hole forming technology design principles including accurate connecting roadway, optimization of borehole structure, high-efficiency hole forming and safety connecting roadway. According to the specific construction conditions of overburden drilling, second foundation rock drilling, casing running and cementing, the paper analyzes the technologies of full casing drilling, pilot hole pipe-guide drilling, cluster DTH hammer reaming drilling, buoyancy casing running and interpolation cementing. Using the theory of loose zone and plastic zone of roadway surrounding rock to check the roof stability with considering that the rock mass in the plastic zone destroyed by the through tunnel drilling is a potential caving body. Then, the design and selection method of key parameters including safe through roadway distance and position are proposed, which could provide technical support for the construction of surface large diameter emergency rescue borehole.

Keywords

large diameter, emergency rescue, hole-forming technology, safe, connecting roadway

DOI

10.3969/j.issn.1001-1986.2021.01.031

Recommended Citation

H M. (2021) "Design and analysis of hole-forming technology for surface large diameter emergency rescue borehole," Coal Geology & Exploration: Vol. 49: Iss. 1, Article 32.
DOI: 10.3969/j.issn.1001-1986.2021.01.031
Available at: https://cge.researchcommons.org/journal/vol49/iss1/32

Reference

[1] 谢和平,王金华,申宝宏,等. 煤炭开采新理念:科学开采与科学产能[J]. 煤炭学报,2012,37(7):1069-1079. XIE Heping,WANG Jinhua,SHEN Baohong,et al. New idea of coal mining:Scientific mining and sustainable mining capacity[J]. Journal of China Coal Society,2012,37(7):1069-1079.

[2] 钱鸣高. 煤炭的科学开采[J]. 煤炭学报,2010,35(4):529-534. QIAN Minggao. On sustainable coal mining in China[J]. Journal of China Coal Society,2010,35(4):529-534.

[3] 解学才,宫伟东,林辰,等. 我国煤矿应急救援现状分析研究[J]. 煤矿安全,2017,48(11):229-232. XIE Xuecai,GONG Weidong,LIN Chen,et al. Analysis study on present situation of emergency rescue in China's coal mines[J]. Safety Coal in Mines,2017,48(11):229-232.

[4] 孙继平,钱晓红. 煤矿事故与应急救援技术装备[J]. 工矿自动化,2016,42(10):1-5. SUN Jiping,QIAN Xiaohong. Coal mine accident and emergency rescue technology equipment[J]. Industrial and Mining Automation,2016,42(10):1-5.

[5] 张洋洋,马汉鹏,刘凯,等. 我国矿山应急救援队伍监管存在的问题与对策[J]. 华北科技学院学报,2018,15(6):103-111. ZHANG Yangyang,MA hanpeng,LIU Kai,et al. Problems and countermeasures of the supervision of mine emergency rescue team in China[J]. Journal of North China Institute of Science and Technology,2018,15(6):103-111.

[6] 田宏亮,张阳,郝世俊,等. 矿山灾害应急救援通道快速安全构建技术与装备[J]. 煤炭科学技术,2019,47(5):29-33. TIAN Hongliang,ZHANG Yang,HAO Shijun,et al. Technology and equipment for rapid safety construction of emergency rescue channel after mine disaster[J]. Coal Science and Technology,2019,47(5):29-33.

[7] 石智军,赵江鹏,陆鸿涛,等. 煤矿区大直径垂直定向孔快速钻进关键技术与装备[J]. 煤炭科学技术,2016,44(9):13-18. SHI Zhijun,ZHAO Jiangpeng,LU Hongtao,et al. Key technology and equipment of rapid drilling for large diameter vertical directional borehole in mine area[J]. Coal Science and Technology,2016,44(9):13-18.

[8] 杨涛,杜兵建. 山东平邑石膏矿矿难大口径救援钻孔施工技术[J]. 探矿工程(岩土钻掘工程),2017,44(5):19-23. YANG Tao,DU Bingjian. Construction technology of large diameter rescue borehole in Pingyi gypsum mine disaster of Shandong Province[J]. Exploration Engineering(Rock & Soil Drilling and Tunneling),2017,44(5):19-23.

[9] 黄军利. 国外煤矿应急救援技术装备综述[J]. 煤矿安全,2016,47(9):233-236. HUANG Junli. A review of foreign technical equipment on coal mine emergency rescue[J]. Safety in Coal Mines,2016,47(9):233-236.

[10] 邹祖杰,凡东,刘庆修,等. 矿山地面大直径钻孔救援提升装备研制[J]. 煤炭科学技术,2017,45(12):160-165. ZOU Zujie,FAN Dong,LIU Qingxiu,et al. Research and development on rescue lifting equipment of large diameter borehole at mine ground[J]. Coal Science and Technology,2017,45(12):160-165.

[11] 张桂林. 钻井工程技术手册(第三版)[M]. 北京:中国石化出版社,2017:951. ZHANG Guilin. Technical of drilling engineering manual(Third Edition)[M]. Beijing:China Petrochemical Press,2017:951.

[12] 莫海涛. 煤矿区地面大口径定向井成井工艺研究[D]. 北京:煤炭科学研究总院,2014:32-35. MO Haitao. Research of construction technology on large diameter directional borehole in coal mining area[D]. Beijing:China Coal Research Institute,2014:32-35.

[13] 杨联锋,彭志平,孙智杰. 汾河特大桥大直径超深旋挖钻孔灌注桩施工技术[J]. 探矿工程(岩土钻掘工程),2019,46(7):89-93. YANG Lianfeng,PENG Zhiping,SUN Zhijie. Construction technology of large diameter ultra-deep rotary bored piles at Fenhe Bridge[J]. Exploration Engineering(Rock & Soil Drilling and Tunneling),2019,46(7):89-93.

[14] 宋志斌,冯起赠,许本冲,等. 全套管钻进机理和全回转套管钻机的研究[J]. 建筑机械,2013,23(12):87-91. SONG Zhibin,FENG Qizeng,XU Benchong,et al. Mechanism of full casing foundation drilling and research on casing rotator[J]. Construction Machinery,2013,23(12):87-91.

[15] 李亮. 旋挖钻机在平邑石膏矿坍塌事故大直径救生孔钻进中的应用[J]. 探矿工程(岩土钻掘工程),2016,43(5):17-21. LI Liang. Application of rotary drilling rig in large diameter rescue hole drilling in the collapse accident in Pingyi gypsum mine[J]. Exploration Engineering(Rock & Soil Drilling and Tunneling),2016,43(5):17-21.

[16] 朱芝同,张化民. 西成高铁卵漂石地层全套管跟管钻进施工技术[J]. 探矿工程(岩土钻掘工程),2015,42(5):50-52. ZHU Zhitong,ZHANG Huamin. Application of drilling with full casing(benote method) in cobble-boulder stratum in Xi'an-Chengdu highspeed rail[J]. Exploration Engineering(Rock & Soil Drilling and Tunneling),2015,42(5):50-52.

[17] 莫海涛,郝世俊,叶根飞. 煤矿区大口径井二开先导孔下导管钻进技术[J]. 煤田地质与勘探,2014,42(4):106-108. MO Haitao,HAO Shijun,YE Genfei. Drilling technology with guide pipe in the second section pilot hole of large-diameter well in coal mining area[J]. Coal Geology & Exploration,2014,42(4):106-108.

[18] 赵江鹏,王四一. 扩孔用集束式反循环潜孔锤的改进设计[J].煤矿安全,2016,47(8):133-135. ZHAO Jiangpeng,WANG Siyi. Improved design of cluster-type reverse circulation DTH hammer for reaming[J]. Safety in Coal Mines,2016,47(8):133-135.

[19] 赵江鹏. 扩孔用集束式反循环潜孔锤设计与试验[J]. 煤矿安全,2016,47(1):106-109. ZHAO Jiangpeng. Design and test of cluster reverse circulation DTH hammer for reaming[J]. Safety in Coal Mines,2016,47(1):106-109.

[20] 黄龙鹏. 长输管道全位置自动焊接工艺研究[J]. 装备制造技术,2020(4):25-30. HUANG Longpeng. Research on full-position automatic welding technology for long distance pipelines[J]. Equipment Manufacturing Technology,2020(4):25-30.

[21] 杜贵亭. 超大口径瓦斯抽排放井施工技术[J]. 探矿工程(岩土钻掘工程),2010,37(12):46-50. DU Guiting. Construction technology of super large diameter gas pumping exhaust well[J]. Exploration Engineering(Rock & Soil Drilling and Tunneling),2010,37(12):46-50.

[22] 黄锋,朱合华,李秋实,等. 隧道围岩松动圈的现场测试与理论分析[J]. 岩土力学,2016,37(增刊1):145-150. HUANG Feng,ZHU Hehua,LI Qiushi,et al. Field detection and theoretic analysis of loose circle of rock mass tunnel surrounding tunnel[J]. Rock and Soil Mechanics,2016,37(Sup.1):145-150.

[23] 李政林,吴瑞祥,李龙剑,等. 基于损伤理论的隧道围岩松动圈确定方法[J]. 地下空间与工程学报,2011,7(6):1060-1064. LI Zhenglin,WU Ruixiang,LI Longjian,et al. Method for defining the loose zone of tunnel surrounding rock based on damage theory[J]. Chinese Journal of Underground Space and Engineering,2011,7(6):1060-1064.

[24] 李浩哲,姜在炳,舒建生,等. 水力裂缝在煤岩界面处穿层扩展规律的数值模拟[J]. 煤田地质与勘探,2020,48(2):106-113. LI Haozhe,JIANG Zaibing,SHU Jiansheng,et al. Numerical simulation of layer-crossing propagation behavior of hydraulic fractures at coal-rock interface[J]. Coal Geology & Exploration,2020,48(2):106-113.

[25] 许耀波. 应力干扰下煤层顶板水平井穿层分段压裂规律[J]. 煤田地质与勘探,2020,48(4):11-18. XU Yaobo. Layer-penetrating staged fracturing law of horizontal wells within roof of coal seams under stress interference[J]. Coal Geology & Exploration,2020,48(4):11-18.

[26] 袁超,王卫军,赵延林,等. 考虑岩体塑性硬化与软化特性的巷道围岩变形理论分析[J]. 煤炭学报,2015,40(增刊2):311-319. YUAN Chao,WANG Weijun,ZHAO Yanlin,et al. Theoretical analysis on roadway surrounding rock deformation based on the properties of rock plastic hardening and softening[J]. Journal of China Coal Society,2015,40(Sup. 2):311-319.

[27] 潘继良,高召宁,任奋华. 考虑应变软化和扩容的圆形巷道围岩强度准则效应[J]. 煤炭学报,2018,43(12):3293-3301. PAN Jiliang,GAO Zhaoning,REN Fenhua. Effect of strength criteria on surrounding rock of circular roadway considering strain softening and dilatancy[J]. Journal of China Coal Society,2018,43(12):3293-3301.

[28] 贾后省,马念杰,朱乾坤. 巷道顶板蝶叶塑性区穿透致冒机理与控制方法[J]. 煤炭学报2016,41(6):1384-1392. JIA Housheng,MA Nianjie,ZHU Qiankun. Mechanism and control method of roof fall resulting from butterfly plastic zone penetration[J]. Journal of China Coal Society,2016,41(6):1384-1392.

[29] 马念杰,李季,赵志强. 圆形巷道围岩偏应力场及塑性区分布规律研究[J]. 中国矿业大学学报,2015,44(2):206-213. MA Nianjie,LI Ji,ZHAO Zhiqiang. Distribution of the deviatoric stress field and plastic zone in circular roadway surrounding rock[J]. Journal of China University of Mining & Technology,2015,44(2):206-213.

[30] 马念杰,赵希栋,赵志强,等. 深部采动巷道顶板稳定性分析与控制[J]. 煤炭学报,2015,40(10):2287-2295. MA Nianjie,ZHAO Xidong,ZHAO Zhiqiang,et al. Stability analysis and control technology of mine roadway roof in deep mining[J]. Journal of China Coal Society,2015,40(10):2287-2295.

[31] 郭晓菲. 巷道围岩塑性区形态判定准则及其应用[D]. 北京:中国矿业大学(北京),2019:35-49. GUO Xiaofei. Criterion of plastic zone shapes of roadway surrounding rock and its application[D]. Beijing:China University of Mining & Technology(Beijing),2019:35-49.

[32] 侯朝炯,郭励生,勾攀峰. 煤巷锚杆支护[M]. 徐州:中国矿业大学出版社,1999:36. HOU Chaojiong,GUO Lisheng,GOU Panfeng. Bolt support in coal roadway[M]. Xuzhou:China University of Mining and Technology Press,1999:36.