Characteristics and monitoring method of the trajectory of the radial CBM well

Authors

XIN Kai, Shanxi Lanyan Coalbed Methane Engineering Research Co. Ltd., Jincheng 048000, China
JI Changjiang, School of Resources and Environment, Henan Polytechnic University, Jiaozuo 454003, China;State Key Laboratory of Coal and CBM Co-Mining, Jincheng 048000, ChinaFollow
XIAO Chun, China Gold Group Geology Co. Ltd., Beijing 100012, China

Abstract

The in-situ stress of 3-1 coal seam in Hongqingliang coal mine was measured by hollow core inclusion measurement, and distribution characteristics of in-situ stress field were obtained in order to solve the problem of serious deformation in mining roadway. Fault structures of grade Ⅰ-Ⅴ in Hongqingliang coal mine were divided by geo-dynamic division method, and the stress areas were divided and the stability of roadways was analysis by rock stress state analysis system. The research showed that the in-situ stress field in Hongqingliang coal mine belongs to the horizontal tectonic stress field, which is dominated by horizontal compressive stress. The direction of in-situ stress field had little influence on the stability of roadway. The stress areas could be divided into four kinds, which are high stress area, stress gradient area, normal stress area and low stress area, and the type's area was 5.9%, 55.7%, 27.0%,11.4% of the whole coal mine. In mining field, stress gradient area and normal stress area accounted for the most, and serious deformation areas were located in high stress area and stress gradient area, which were the main reasons that affected the stability of roadways. Distribution characteristics of in-situ stress field and the division of stress area would play important roles in the mining deployment and support design in Hongqingliang coal mine and other coal mines in similar conditions.

Keywords

in-situ stress measurement, in-situ stress field, roadway deformation, geo-dynamic division, rock stress state analysis, stress area division, Hongqingliang coal mine

DOI

10.3969/j.issn.1001-1986.2020.06.018

Recommended Citation

XIN Kai, JI Changjiang, XIAO Chun, et al. (2020) "Characteristics and monitoring method of the trajectory of the radial CBM well," Coal Geology & Exploration: Vol. 48: Iss. 6, Article 19.
DOI: 10.3969/j.issn.1001-1986.2020.06.018
Available at: https://cge.researchcommons.org/journal/vol48/iss6/19

Reference

[1] 张彪,张遂安,董银涛,等. 煤层气径向钻井压耗计算与井口压力预测[J]. 煤田地质与勘探,2017,45(4):170-174. ZHANG Biao,ZHANG Sui'an,DONG Yintao,et al. Friction loss calculation and wellhead pressure prediction in CBM radial drilling[J]. Coal Geology & Exploration,2017,45(4):170-174.
[2] 李根生,沈忠厚. 高压水射流理论及其在石油工程中应用研究进展[J]. 石油勘探与开发,2005,32(1):96-99. LI Gensheng,SHEN Zhonghou. Advances in researches and applications of water jet theory in petroleum engineering[J]. Petroleum Exploration and Development,2005,32(1):96-99.
[3] 郝春生,季长江. 基于径向井技术的煤储层高效增透工艺研究[J]. 煤炭科学技术,2016,44(5):39-42. HAO Chunsheng,JI Changjiang. Study on high efficient permeability improved technique of coal reservoir based on radial well technology[J]. Coal Science and Technology,2016,44(5):39-42.
[4] 崔龙连,汪海阁,葛云华,等. 新型径向钻井技术[J]. 石油钻采工艺,2008,30(6):29-33. CUI Longlian,WANG Haige,GE Yunhua,et al. New radial drilling technologies[J]. Oil Drilling & Production Technology,2008,30(6):29-33.
[5] 马开良,吴福才,杨永印,等. 径向井技术在韦5井的应用[J]. 钻采工艺,2005,28(5):17-20. MA Kailiang,WU Fucai,YANG Yongyin,et al. Application of radial horizontal drilling technology in W5 well[J]. Drilling & Production Technology,2005,28(5):17-20.
[6] 黄中伟,李根生,唐志军,等. 水力喷射侧钻径向微小井眼技术[J]. 石油钻探技术,2013,41(4):37-41. HUANG Zhongwei,LI Gensheng,TANG Zhijun,et al. Technology of hydra-jet sidetracking of horizontal micro-radial laterals[J]. Petroleum Drilling Techniques,2013,41(4):37-41.
[7] 林凤波,尚庆春,薛铃,等. 水力开窗径向水平孔技术研究与试验[J]. 石油钻探技术,2002,30(5):25-26. LIN Fengbo,SHANG Qingchun,XUE Ling,et al. Research and experiments on cutting windows by water-jetting techniques[J]. Petroleum Drilling Techniques,2002,30(5):25-26.
[8] 杨阳,曲占庆,曹砚锋,等. 径向井远端压裂电模拟实验研究[J]. 断块油气田,2014,21(3):386-389. YANG Yang,QU Zhanqing,CAO Yanfeng,et al. Experiment research on electrical simulation of distal fracturing for radial well[J]. Fault-Block Oil and Gas Field,2014,21(3):386-389.
[9] 施连海,李永和,郭洪峰,等. 高压水射流径向水平井钻井技术[J]. 石油钻探技术,2001,29(5):21-22. SHI Lianhai,LI Yonghe,GUO Hongfeng,et al. Radial horizontal drilling techniques with high pressure water jet[J]. Petroleum Drilling Techniques,2001,29(5):21-22.
[10] 党文辉,马宏伟,陈建林,等. 套管内钻孔深穿透径向井技术[J]. 石油钻采工艺,2013,35(1):45-47. DANG Wenhui,MA Hongwei,CHEN Jianlin,et al. Research on deep penetration of radial well hole-drilling in casing[J]. Oil Drilling & Production Technology,2013,35(1):45-47.
[11] 田雨,曲占庆,郭天魁,等. 径向井引导水力压裂裂缝定向扩展技术[J]. 科学技术与工程,2017,17(20):154-159. TIAN Yu,QU Zhanqing,GUO Tiankui,et al. Theoretical research on radial wells orientating hydraulically created fracture directional extended[J]. Science Technology and Engineering,2017,17(20):154-159.
[12] YAO Lujian,ZHAI Mingyang,WANG Sixu. A numerical investigation on the hydraulic fracturing efficiency in radial well[J]. Geotechnical and Geological Engineering,2019,37(5):4503-4513.
[13] 张毅,李根生,熊伟,等. 高压水射流深穿透射孔增产机理研究[J]. 石油大学学报(自然科学版),2004,28(2):38-41. ZHANG Yi,LI Gensheng,XIONG Wei,et al. Stimulation mechanism of oil well using high-pressure water jet deep-penetrating perforation technique[J]. Journal of the University of Petroleum,2004,28(2):38-41.
[14] LI Gao,REN Wenxi,MENG Yingfeng,et al. Micro-flow kinetics research on water invasion in tight sandstone reservoirs[J]. Journal of Natural Gas Science and Engineering,2014,20:184-191.
[15] 鲜保安,夏柏如,张义,等. 开发低煤阶煤层气的新型径向水平井技术[J]. 煤田地质与勘探,2010,38(4):25-29. XIAN Bao'an,XIA Bairu,ZHANG Yi,et al. Technical analysis on radial horizontal well for development of coalbed methane of low coal rank[J]. Coal Geology & Exploration,2010,38(4):25-29.
[16] 杨新乐,张永利,李惟慷. 超短半径径向水平井抽采煤层气渗流规律的数值模拟[J]. 防灾减灾工程学报,2011,31(1):50-55. YANG Xinle,ZHANG Yongli,LI Weikang. Numerical simulation of CBM seepage rule for ultra-short radius radial horizontal wells[J]. Journal of Disaster Prevention and Mitigation Engineering,2011,31(1):50-55.
[17] 张彪,张遂安,董银涛,等. 煤层气径向钻井压耗计算与井口压力预测[J]. 煤田地质与勘探,2017,45(4):170-174. ZHANG Biao,ZHANG Sui'an,DONG Yintao,et al. Friction loss calculation and wellhead pressure prediction in CBM radial drilling[J]. Coal Geology & Exploration,2017,45(4):170-174.
[18] 付宣,李根生,黄中伟,等. 煤层气径向水平井压裂室内试验与产能数值分析[J]. 石油钻探技术,2016,44(2):99-105. FU Xuan,LI Gensheng,HUANG Zhongwei,et al. Laboratory testing and productivity numerical simulation for fracturing CBM radial horizontal wells[J]. Petroleum Drilling Techniques,2016,44(2):99-105.
[19] 田守嶒,黄中伟,李根生,等. 径向井复合脉动水力压裂煤层气储层解堵和增产室内实验[J]. 天然气工业,2018,38(9):88-94. TIAN Shouceng,HUANG Zhongwei,LI Gensheng,et al. Laboratory experiments on blockage removing and stimulation of CBM reservoirs by composite pulsating fracturing of radial horizontal wells[J]. Natural Gas Industry,2018,38(9):88-94.
[20] 张金成. 电位法井间监测技术[J]. 地震地质,2001,23(2):292-300. ZHANG Jincheng. Monitoring technique based on the electrometric method interwell[J]. Seismology and Geology,2001,23(2):292-300.
[21] 苗福全,熊杰,贾玉生,等. 电位法找水流方向技术在玉门鸭儿峡油田的应用[J]. 钻采工艺,2010,33(2):61- 62. MIAO Fuquan,XIONG Jie,JIA Yusheng,et al. Application of finding the flow direction technology by using electrometric method in Yumen Yaerxia oilfield[J]. Drilling & Production Technology,2010,33(2):61-62.
[22] 吴柏志,李军. 电位法井间监测技术在压裂裂缝监测中的应用[J]. 石油地质与工程,2011,25(2):126-128. WU Baizhi,LI Jun. Application of monitoring technology based on the electrometric method inter well in fracturing monitoring[J]. Petroleum Geology and Engineering,2011,25(2):126-128.