Research and application of casing milling and fishing technology in floor comb-shaped directional borehole

Authors

GUAN Qiangsheng, Xi'an Research Institute, China Coal Technology and Engineering Group, Xi'an 710077, China
WEI Hongchao, Xi'an Research Institute, China Coal Technology and Engineering Group, Xi'an 710077, China

Abstract

In order to solve the problem that using the conventional strong-force rotary drawing process for borehole sticking accident in comb-shaped directional borehole in floor is not ideal, and using reverse thread drill pipe or strong twist cause big time and economic loss, through the calculation and analysis of the passing capacity of casing milling and fishing pipe in the curved hole, the technical parameters of casing milling and fishing, the sticking accident of floor comb-shaped directional borehole with the depth of 344 m in a coal mine in Henan Province was successfully solved. The application results show that the maximum hole curvature for the existing casing milling and fishing pipe to pass through is large. The rotation speed was controlled at 30-50 r/min in the process of casing milling and fishing, and the drilling speed was controlled at 6-12 m/h, the borehole was washed with fluid every 12-15 m. The adoption of this set of milling and fishing technology and equipment can effectively improve the success rate of drilling sticking accident treatment in floor comb-shaped directional borehole.

Keywords

floor comb-shaped directional borehole, casing milling and fishing, passing capacity, technical parameter, accident handling

DOI

10.3969/j.issn.1001-1986.2019.06.032

Recommended Citation

G W. (2019) "Research and application of casing milling and fishing technology in floor comb-shaped directional borehole," Coal Geology & Exploration: Vol. 47: Iss. 6, Article 33.
DOI: 10.3969/j.issn.1001-1986.2019.06.032
Available at: https://cge.researchcommons.org/journal/vol47/iss6/33

Reference

[1] 姚宁平,张杰,张国亮,等. 晋城矿区井下梳状钻孔瓦斯抽采技术体系[J]. 煤炭科学技术,2015,43(2):88-90. YAO Ningping,ZHANG Jie,ZHANG Guoliang,et al. System of gas drainage technology of comb-like directional drilling in Jincheng mining area[J]. Coal Science and Technology,2015,43(2):88-90.

[2] 姚宁平,姚亚峰,张杰,等. 煤矿井下梳状定向孔钻进技术与装备[J]. 煤炭科学技术,2012,40(10):12-16. YAO Ningping,YAO Yafeng,ZHANG Jie,et al. Technology and equipment of pectination directional drilling in underground mine[J]. Coal Science and Technology,2012,40(10):12-16.

[3] 姚宁平,张杰,李泉新,等. 煤矿井下梳状定向孔钻进技术研究与实践[J]. 煤炭科学技术,2012,40(5):30-34. YAO Ningping,ZHANG Jie,LI Quanxin,et al. Researchment and application of comb type directional borehole drilling technology in underground mine[J]. Coal Science and Technology,2012,40(5):30-34.

[4] 赵家明,胡家森,刘秋霞,等. 定向井泥页岩地层复杂事故处理[J]. 石油钻采工艺,2016,38(1):23-29. ZHAO Jiaming,HU Jiasen,LIU Qiuxia,et al. Handling of complex accidents in shale formations of directional well[J]. Oil Drilling & Production Technology,2016,38(1):23-29.

[5] 雍富国. 涩北气田水平井卡钻处理技术[J]. 钻采工艺,2016,39(2):119-122. YONG Fuguo. Horizontal well sticking accident treatment in Sebei gas field[J]. Drilling & Production Technology,2016,39(2):119-122.

[6] 张杰,蒋玉玺,姚宁平. 九里山矿井下定向钻孔卡钻事故处理实践[J]. 煤矿安全,2012,43(11):125-127. ZHANG Jie,JIANG Yuxi,YAO Ningping. The practice of sticking accident treatment for directional drilling in Jiulishan coal mine[J]. Safety in Coal Mines,2012,43(11):125-127.

[7] 王昕. 套铣打捞技术在矿井钻具断裂事故中的应用[J]. 煤矿安全,2014,45(9):155-157. WANG Xin. Application of milling and fishing technology in mine drilling tool fracture accident[J]. Safety in Coal Mines,2014,45(9):155-157.

[8] 孙利海. 打捞工艺在井下卡钻事故处理中的应用[J]. 煤炭技术,2018,37(1):258-260. SUN Lihai. Application of fishing technology in mine drilling tool sticking accident[J]. Coal Technology,2018,37(1):258-260.

[9] 许超,石智军. 煤矿井下定向钻进钻孔事故的预防及处理[J]. 煤田地质与勘探,2014,42(3):100-104. XU Chao,SHI Zhijun. Prevention and treatment of drilling accident in underground coal mine[J]. Coal Geology & Exploration,2014,42(3):100-104.

[10] 王力. 井下瓦斯抽采穿层孔短半径钻进曲率半径计算[J]. 煤炭科学技术,2015,43(增刊1):93-95. WANG Li. Caculation on curvature radius of short radius cross-measure gas drainage borehole in underground coal mine[J]. Coal Science and Technology,2015,43(S1):93-95.

[11] 赵旭亮. 刚性井下工具通过能力分析[J]. 石油机械,2011,39(10):66-68. ZHAO Xuliang. Capability analysis of rigid downhole tools[J]. China Perroleum Machinery,2011,39(10):66-68.

[12] 康海涛,白俊成,蔡云平,等. 马深1井超深小钻孔井眼准备及套管下入技术[J]. 石油钻采工艺,2016,38(5):583-587. KANG Haitao,BAI Juncheng,CAI Yunping,et al. The preparing running casing technology of super deep and slim hole in well Mashen-1[J]. Oil Drilling & Production Technology,2016,38(5):583-587.

[13] 徐德奎,任虎彪,李明飞,等. 考虑弯矩和剪切影响的造斜段套管抗挤强度分析[J]. 石油机械,2016,44(9):11-14. XU Dekui,REN Hubiao,LI Mingfei,et al. Analysis of collapsing strength of casing in buildup section considering bending moment and shear influence[J]. China Petroleum Machinery,2016,44(9):11-14.

[14] 贾宗文,刘书杰,耿亚楠,等. 弯曲井段套管抗挤强度理论及试验研究[J]. 石油机械,2018,46(9):100-105. JIA Zongwen,LIU Shujie,GENG Yanan,et al. Theoretical and experimental study on the collapse strength of casing in curvel well section[J]. China Petroleum Machinery,2018,46(9):100-105.

[15] 贾宗文. 考虑磨损的弯曲套管抗挤强度研究及应用[J]. 石油机械,2018,46(12):1-7. JIA Zongwen. Research on collapse strength of casing in buildup section[J]. China Petroleum Machinery,2018,46(12):1-7.

[16] 夏志军. 下套管过程中的套管接触形态及摩阻分析[D]. 成都:西南石油大学,2017.

[17] 张凯敏. 水平井下套管摩阻研究[D]. 成都:西南石油大学,2014.

[18] 《钻井手册(甲方)》编写组. 钻井手册(甲方)下册[M]. 北京:石油工业出版社,1990:9-10.

[19] 韩志勇,王德新. 套管可通过的最大井眼曲率的确定方法[J]. 石油钻探技术,1999,27(2):15-17. HAN Zhiyong,WANG Dexin. Method of determining the maxmum hole curvature that casing can be run through[J]. Petroleum Drilling Techniques,1999,27(2):15-17.

[20] 范子涛,王昆剑,乔腾,等. 曹妃甸油田EZSV桥塞套铣打捞分析研究[J]. 钻采工艺,2018,41(6):108-110. FAN Zitao,WANG Kunjian,QIAO Teng,et al. Analysis and research of milling and fishing of EZSV bridge plug in Caofeidian oilfield[J]. Drilling & Production Technology,2018,41(6):108-110.

[21] 陈江华,吴惠梅,李忠慧,等. 超深定向井钻井中钻井参数对套管磨损量的影响[J]. 石油钻采工艺,2014,36(5):10-12. CHEN Jianghua,WU Huimei,LI Zhonghui,et al. Effect of drilling parameters on casing wear rate in ultra-deep directional well drilling[J]. Oil Drilling & Production Technology,2014,36(5):10-12.

[22] 何世明,郭小阳,徐壁华,等. 水平井下套管摩阻分析计算[J]. 西南石油学院学报,1997,19(2):29-34. HE Shiming,GUO Xiaoyang,XU Bihua,et al. Analysis and calculation of casing friction in horizontal well[J]. Journal of Southwest Petroleum Institute,1997,19(2):29-34.