Comprehensive evaluation technology and application of grouting reinforcement effect for broken coal and rock mass

Authors

WANG Xiaolei, Department of Mining Engineering, Luliang University, Lvliang 033000, China; Key of Laboratory of Maintenance and Inspection of Coal Mine Mechanical Equipment of Lvliang City, Lvliang 033000, China; Geoscience College, Southwest Petroleum University, Chengdu 610500, China
JI Zhigang, Department of Mining Engineering, Luliang University, Lvliang 033000, China
LUO Wenqiang, Department of Mining Engineering, Luliang University, Lvliang 033000, China

Abstract

Grouting reinforcement of broken coal and rock mass plays an important role in controlling the stability of surrounding rocks, and the grouting effect detection is an important link to ensure the grouting engineering to meet the requirements. The evaluation index was quantitatively analyzed by slurry filling rate method, mechanical parameter method, segmented water injection method, geological radar method, drilling television method and core inspection method. The comprehensive evaluation form of grouting effect was put forward, and the application research was carried out. The results show:The rate of filling slurry and coring was more than 90%; After grouting, the compressive strength and flexural strength were more 80% and 75% before mining respectively; The porosity was less than 10%; The borehole leakage was less than 4 L/min; There was only few big size(> 1mm) fracture; The most large deformation did not affect the use of normal roadway, this confirmed comprehensive grouting effect checking and evaluating form were effective.

Keywords

grouting reinforcement, effect testing, comprehensive evaluation, broken coal and rock mass

DOI

10.3969/j.issn.1001-1986.2019.06.015

Recommended Citation

WANG Xiaolei, JI Zhigang, LUO Wenqiang, et al. (2019) "Comprehensive evaluation technology and application of grouting reinforcement effect for broken coal and rock mass," Coal Geology & Exploration: Vol. 47: Iss. 6, Article 16.
DOI: 10.3969/j.issn.1001-1986.2019.06.015
Available at: https://cge.researchcommons.org/journal/vol47/iss6/16

Reference

[1] 王晓蕾,秦启荣,熊祖强,等. 层次注浆工艺在松软巷道破碎围岩加固中的应用[J]. 地下空间与工程学报,2017,13(1):206-212. WANG Xiaolei,QIN Qirong,XIONG Zuqiang,et al. Applications of level grouting process in soft roadway to reinforce broken surrounding rock[J]. Chinese Journal of Underground Space and Engineering,2017,13(1):206-212.

[2] 董萌萌. 煤矿井下用Ф73 mm高韧性高强度钻杆的研制及应用[J]. 煤田地质与勘探,2017,45(2):152-156. DONG Mengmeng. Development and application of Ф73 mm high toughness and high strength drilling pipe[J]. Coal Geology & Exploration,2017,45(2):152-156.

[3] 方俊,陆军,张幼振,等. 定向长钻孔精确探放矿井老空水技术及其应用[J]. 煤田地质与勘探,2015,43(2):101-105. FANG Jun,LU Jun,ZHANG Youzhen,et al. Technology and application of precise detection and drainage of goaf water by directional long borehole[J]. Coal Geology & Exploration,2015,43(2):101-105.

[4] 南生辉. 邯邢矿区奥陶系灰岩上部注浆改造技术[J]. 煤田地质与勘探,2010,38(3):37-40. NAN Shenghui. Technical feasibility of grouting reform for upper part of Ordovician limestone in Xingtai and Handan coal mining areas[J]. Coal Geology & Exploration,2010,38(3):37-40.

[5] 张可能,黄飞,艾孝军,等. 水泥-水玻璃双液注浆三阶段加固模型及其应用[J]. 煤田地质与勘探,2015,43(2):73-76. ZHANG Keneng,HUANG Fei,AI Xiaojun,et al. Three-stage model of cement-water glass grouting and its engineering application[J]. Coal Geology & Exploration,2015,43(2):73-76

[6] 熊祖强,王晓蕾. 承压水上工作面破坏及裂隙演化相似模拟试验[J]. 地下空间与工程学报,2014,10(5):1114-1120. XIONG Zuqiang,WANG Xiaolei. Similar simulation for breakage law and cracks evolution of working face in coal mining above aquifer[J]. Chinese Journal of Underground Space and Engineering,2014,10(5):1114-1120.

[7] 何祥,杨科,刘文军,等. 坚硬顶板厚煤层卸压开采覆岩运移特征试验研究[J]. 地下空间与工程学报,2016,12(6):1559-1564. HE Xiang,YANG Ke,LIU Wenjun,et al. Experimental investigation into overlying strata movement characteristics in thick coal seam stress-relief mining in hard-thick roof[J]. Chinese Journal of Underground Space and Engineering,2016,12(6):1559-1564.

[8] 窦礼同,杨科,闫书缘.近距离煤层卸压开采围岩力学特征试验研究[J]. 地下空间与工程学报,2014,10(5):1177-1182. DOU Litong,YANG Ke,YAN Shuyuan. Experimental investigation into mechanical characteristics of surrounding rock in close distance coal seams with relieving mining[J]. Chinese Journal of Underground Space and Engineering,2014,10(5):1177-1182.

[9] 许振浩,李术才,张庆松,等. TSP超前地质预报地震波反射特性研究[J]. 地下空间与工程学报,2008,4(4):640-644. XU Zhenhao,LI Shucai,ZHANG Qingsong,et al. Reflection characteristic of seismic wave in TSP advanced geological prediction[J]. Chinese Journal of Underground Space and Engineering,2008,4(4):640-644.

[10] 王连国,韩猛,王占盛,等. 采场底板应力分布与破坏规律研究[J]. 采矿与安全工程学报,2013,30(3):317-322. WANG Lianguo,HAN Meng,WANG Zhansheng,et al. Stress distribution and damage law of mining floor[J]. Journal of Mining & Safety Engineering,2013,30(3):317-322.

[11] 王晓振,许家林,朱卫兵,等. 松散承压含水层特征对其载荷传递特性的影响研究[J]. 采矿与安全工程学报,2014,31(4):499-505. WANG Xiaozhen,XU Jialin,ZHU Weibing,et al. Study on the influence of the characteristic of unconsolidated confined aquifer on its property of load transfer[J]. Journal of Mining & Safety Engineering,2014,31(4):499-505.

[12] 刘泉声,卢超波,刘滨,等. 深部巷道注浆加固浆液扩散机理与应用研究[J]. 采矿与安全工程学报,2014,31(3):333-339. LIU Quansheng,LU Chaobo,LIU Bin,et al. Research on the grouting diffusion mechanism and its application of grouting reinforcement in deep roadway[J]. Journal of Mining & Safety Engineering,2014,31(3):333-339.

[13] 李飞,周泽,赖笼,等. 松软破碎围岩巷道注浆参数试验研究[J]. 湖南科技大学学报(自然科学版),2014,29(4):7-11. LI Fei,ZHOU Ze,LAI Long,et al. Study on grouting parameters with soft broken surrounding rock mine[J]. Journal of Hunan University of Science & Technology(Natural Science Edition),2014,29(4):7-11.

[14] 乔卫国,程少北,林登阁,等. 巨厚煤层全煤巷道破坏机理及注浆效果数值模拟[J]. 金属矿山,2014,43(2):26-29. QIAO Weiguo,CHENG Shaobei,LIN Dengge,et al. Nu-merical simulation research of failure mechanism and grout-ing effects[J]. Metal Mine,2014,43(2):26-29.

[15] 雷进生,刘非,王乾峰,等. 非均质土层的注浆扩散特性与加固力学行为研究[J]. 岩土工程学报,2015,37(12):2245-2253. LEI Jinsheng,LIU Fei,WANG Qianfeng,et al. Diffusion characteristics and reinforcement mechanics of grouting in non-homogeneous soil strata[J]. Chinese Journal of Geotechnical Engineering,2015,37(12):2245-2253.