Development of impact screw motor

Authors

WANG Siyi, Xi'an Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Xi'an 710077, China
LI Quanxin, Xi'an Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Xi'an 710077, China
LIU Jianlin, Xi'an Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Xi'an 710077, China
ZHAO Jiangpeng, Xi'an Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Xi'an 710077, China
YANG Dongdong, Xi'an Research Institute Co. Ltd., China Coal Technology and Engineering Group Corp., Xi'an 710077, China

Abstract

Aiming at the problems of low efficiency and high consumption of bits and drilling tools in drilling hard rock with conventional single bend screw motor, an impact screw motor is developed by adding an impact mechanism between the universal shaft of a common screw motor and the drill bit. The impact screw motor has dual functions of impact and orientation. The structure and the working principle of impact mechanism, the design of key components and the characteristics of the impact screw motor are introduced. Laboratory tests were carried out on the φ89 mm impact mechanism, and the peak impact force was measured to be 5 000-9 000 N, which was in agreement with the theoretical calculation results. The wear resistance of the hammer and anvil of the composite structure composed of cemented carbide and bearing steel meets the requirements of industrial application. Field industrial tests have been carried out in Sihe coal mine of Jincheng Coal Group,drilling efficiency is 20%-30% higher than that of conventional single bend screw motor.

Keywords

screw motor, impact mechanism, hard rock, directional drilling, drilling efficiency

DOI

10.3969/j.issn.1001-1986.2019.05.032

Recommended Citation

WANG Siyi, LI Quanxin, LIU Jianlin, et al. (2019) "Development of impact screw motor," Coal Geology & Exploration: Vol. 47: Iss. 5, Article 33.
DOI: 10.3969/j.issn.1001-1986.2019.05.032
Available at: https://cge.researchcommons.org/journal/vol47/iss5/33

Reference

[1] 刘建林,王四一,赵江鹏,等. 单弯螺杆马达与液动潜孔锤复合钻具研究[J]. 煤炭科学技术,2018,46(5):143-147. LIU Jianlin,WANG Siyi,ZHAO Jiangpeng,et al. Study on compound drilling tools of single bending screw motor and hydro hammer[J]. Coal Science and Technology,2018,46(5):143-147.

[2] 赵永哲,石智军,张迎接. 煤层气水平对接井用单弯无稳螺杆钻具组合造斜能力预测[J]. 煤田地质与勘探,2018,46(3):163-167. ZHAO Yongzhe,SHI Zhijun,ZHANG Yingjie. Prediction of deflection capacity of PDM with single bent screw without stabilizer for CBM horizontal-butted well[J]. Coal Geology & Exploration,2018,46(3):163-167.

[3] 石智军,董书宁,姚宁平,等. 煤矿井下近水平随钻测量定向钻进技术与装备[J]. 煤炭科学技术,2013,41(3):1-6. SHI Zhijun,DONG Shuning,YAO Ningping,et al. Technology and equipment of horizontal measuring directional drilling in underground coal mine[J]. Coal Science and Technology,2013,41(3):1-6.

[4] 李泉新,石智军,史海岐. 煤矿井下定向钻进工艺技术的应用[J]. 煤田地质与勘探,2014,42(2):85-88. LI Quanxin,SHI Zhijun,SHI Haiqi. The application of directional drilling technology in coal mine[J]. Coal Geology & Exploration,2014,42(2):85-88.

[5] 赵建国,赵江鹏,许超,等. 煤矿井下复合定向钻进技术研究与应用[J]. 煤田地质与勘探,2018,46(4):202-206. ZHAO Jianguo,ZHAO Jiangpeng,XU Chao,et al. Composite directional drilling technology in underground coal mine[J]. Coal Geology & Exploration,2018,46(4):202-206.

[6] 李泉新. 煤层底板超前注浆加固定向钻孔钻进技术[J]. 煤炭科学技术,2014,42(1):138-142. LI Quanxin. Drilling technology of directional drilled borehole for advance grouting reinforcement of seam floor[J]. Coal Science and Technology,2014,42(1):138-142.

[7] 王四一. 煤矿隐蔽致灾地质因素井下探查用随钻测量系统测试研究[J]. 探矿工程(岩土钻掘工程),2016,43(6):68-71. WANG Siyi. Research on test of MWD system used for exploration of the hidden geological factors causing disasters in coal mine[J]. Exploration Engineering(Rock & Soil Drilling and Tunneling),2016,43(6):68-71.

[8] 魏宏超. 煤矿井下硬岩层高效成孔方法研究与应用[J]. 煤矿安全,2016,47(11):114-116. WEI Hongchao. Study and application of efficient pore-forming in hard rock formations of coal mine[J]. Safety in Coal Mines,2016,47(11):114-116.

[9] 金鑫. 煤矿井下硬岩定向钻进螺杆马达选型及试验[J]. 煤田地质与勘探,2018,46(1):176-180. JIN Xin. The selection and test analysis of PDM for directional drilling in hard rock[J]. Coal Geology & Exploration,2018,46(1):176-180.

[10] 吕晓平,李国兴,王震宇,等. 扭力冲击器在鸭深1井志留系地层的试验应用[J]. 石油钻采工艺,2012,34(2):99-101. LYU Xiaoping,LI Guoxing,WANG Zhenyu,et al. Experiment of torkbuster on well YS1 in Silurian Formation[J]. Oil Drilling & Production Technology,2012,34(2):99-101.

[11] 徐小荷,余静. 岩石破碎学[M]. 北京:煤炭工业出版社,1984.

[12] 赵永哲. 矿用近水平定向钻进螺杆钻具组合孔斜力参数敏感性分析[J]. 煤炭工程,2013,45(11):123-125. ZHAO Yongzhe. Parameter sensitivity analysis on inclined force of combined borehole drilled with screw drill tool of mine subhorizontal directional drilling[J]. Coal Engineering,2013,45(11):123-125.

[13] 鄢泰宁. 岩土钻掘工艺学[M]. 长沙:中南大学出版社,2014.

[14] 张英会,刘辉航,王德成. 弹簧手册[M]. 北京:机械工业出版社,2008.

[15] 罗林阁,曹映泓,陈国虞,等. 船舶撞击桥梁的撞击力计算方法探讨[J]. 中外公路,2006,26(5):78-81. LUO Linge,CAO Yinghong,CHEN Guoyu,et al. Discussion on calculation method of impact force of ship impacting bridge[J]. Chinese and Foreign Roads,2006,26(5):78-81.

[16] 孙阳. 冲击试验机高采样率实时数据采集系统的研制[D]. 成都:西南交通大学,2018.

[17] 王俊峰. 碰撞冲击力的数值计算与测试方法研究[D]. 上海:上海交通大学,2007.