Design of remote control system of drilling rig in coal mines

Authors

WENG Yinsheng, Xi'an Research Institute Co. Ltd., China Technology and Engineering Group Corp., Xi'an 710077, China; School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049, China
WU Di, Xi'an Research Institute Co. Ltd., China Technology and Engineering Group Corp., Xi'an 710077, China
LU Feifei, Xi'an Research Institute Co. Ltd., China Technology and Engineering Group Corp., Xi'an 710077, China
WANG Longpeng, Xi'an Research Institute Co. Ltd., China Technology and Engineering Group Corp., Xi'an 710077, China

Abstract

In order to solve the influence of the dangerous conditions in the deep mine, such as large percus-sive ground pressure and high temperature and humidity of the roadways in deep mines on drilling operation, a remote control drilling rig control system is designed. The control system consists of local control terminal and remote control terminal, both communicating by CAN(Controller Area Network) bus and optical fiber for data and image. Local control terminal core uses automobile PLC(Programmable Logic Controller) as the control core to realize data acquisition and control, develops program in CoDeSys. The remote control terminal, based on MCU and PC104, realizes the remote command transmit-receive and display, and display interface of PC extending CAN interface, is developed by LabVIEW. The actual application results of the control system show that the control system has achieved remote 800 meters control, has the advantages of fast response, convenient operation, high reliability, friendly man-machine interaction and so on.

Keywords

control system, design, drilling rig, fiber, CAN bus

DOI

10.3969/j.issn.1001-1986.2019.02.004

Recommended Citation

WENG Yinsheng, WU Di, LU Feifei, et al. (2019) "Design of remote control system of drilling rig in coal mines," Coal Geology & Exploration: Vol. 47: Iss. 2, Article 5.
DOI: 10.3969/j.issn.1001-1986.2019.02.004
Available at: https://cge.researchcommons.org/journal/vol47/iss2/5

Reference

[1] 石智军,胡少韵,姚宁平,等. 煤矿井下瓦斯抽采(放)钻孔施工新技术[M]. 北京:煤炭工业出版社,2009.

[2] 王贺剑. 矿井远程控制钻机电液控制系统研究[D]. 北京:煤炭科学研究总院,2013.

[3] 张景钢,杨诗涵,索诚宇. 高温高湿环境对矿工生理心理影响试验研究[J]. 中国安全科学学报,2015,25(1):23-28. ZHANG Jinggang,YANG Shihan,SUO Chengyu. Research on effcets of high temperature and high humidity environment on miners' physiology and psychology[J]. China Safety Science Journal,2015,25(1):23-28.

[4] 翁寅生,殷新胜,赵良. 松软煤层坑道钻机钻进参数测量系统设计[J]. 煤田地质与勘探,2014,42(5):100-103. WENG Yinsheng,YIN Xinsheng,ZHAO Liang. Design of drilling parameter measuring system of drill rig in soft coal seam[J]. Coal Geology & Exploration,2014,42(5):100-103.

[5] 林青. 光纤通信技术现状及发展趋势研究[J]. 通讯世界,2015(12):13-14. LIN Qing. Technology status and development trend of optical fiber communication[J]. Telecom World,2015(12):13-14.

[6] 凡东,翁寅生,张建明,等. 一种煤矿井下坑道钻机多终端参数监测系统:CN102720478A[P]. 2012-10-10.

[7] 翁寅生. 煤矿井下坑道钻机CAN总线通信系统[J]. 煤矿机械,2013,34(2):224-226. WENG Yinsheng. CAN bus communication system of tunnel drilling rig in coal mine[J]. Coal Mine Machinery,2013,34(2):224-226.

[8] 罗峰,孙泽昌. 汽车CAN总线系统原理、设计及应用[M]. 北京:电子工业出版社,2011.

[9] 翁寅生. 基于STM32的远程控制节点设计[J]. 机床与液压,2017,45(23):56-60. WENG Yinsheng. Design of remote control node base on STM32[J]. Machine Tool & Hydraulics,2017,45(23):56-60.

[10] 童建林,彭燕华. CoDeSys在开放式PLC系统中的应用[J]. 电工技术,2013(7):38-39. TONG Jianlin,PENG Yanhua. Application of CoDeSys in open PLC system[J]. Electric Engineering,2013(7):38-39.

[11] 赵良,殷新胜,翁寅生. 基于CoDeSys的坑道钻机参数监控系统设计[J]. 煤炭工程,2016,48(2):56-58. ZHAO Liang,YIN Xinsheng,WENG Yinsheng. Design on parameter monitoring system of tunnel drilling rig based on CoDeSys[J]. Coal Engineering,2016,48(2):56-58.

[12] 王贺剑,翁寅生. 一种煤矿坑道钻机控制系统软件设计[J]. 煤矿安全,2018,49(2):111-114. WANG Hejian,WENG Yinsheng. Software design on control system for a kind of underground drill rig in coal mine[J]. Safety in Coal Mines,2018,49(2):111-114

[13] 罗明华,沈明,薛彦波.井下瓦斯抽采钻机远程控制系统的设计[J]. 工况自动化,2011,37(8):14-16. LUO Minghua,SHEN Ming,XUE Yanbo. design of remote control system of drill of gas extraction in coal mine under-ground[J]. Industry and Mine Automation. 2011,37(8):14-16.

[14] 阮奇桢.我和LabView[M].北京:北京航空航天大学出版社,2012.

[15] 殷鹏龙,黄红武,张军,等. 基于LabVIEW和CAN的挖掘机GPS功能的监控系统设计[J]. 中国工程机械学报,2011,9(3):309-314. YIN Penglong,HUANG Hongwu,ZHANG Jun,et al. GPS-monitoring system design for excavators based on LabVIEW and CAN[J]. Chinese Journal of Construction Machinery,2011,9(3):309-314.