Sealing performance analysis and structure optimization of pressure-preserved controller for pressure-preserved coring in deep coal mine

Authors

WANG Tianyu, College of Water Resources and Hydropower, Sichuan University, Chengdu 610065, ChinaFollow
LI Jianan, College of Water Resources and Hydropower, Sichuan University, Chengdu 610065, ChinaFollow
ZHANG Yiwei, College of Water Resources and Hydropower, Sichuan University, Chengdu 610065, China
LI Ju, College of Mechanical Engineering, Sichuan University, Chengdu 610065, China
XIE Heping, College of Water Resources and Hydropower, Sichuan University, Chengdu 610065, China; Institute of Deep Earth Science and Green Energy, Shenzhen University, Shenzhen 518060, China

Abstract

As the pressure-preserved controller is a core component of the deep coal in-situ pressure-preserved coring device, its sealing design plays a decisive role in the effect of pressure-preserved coring. In order to obtain the optimal sealing structure, a two-dimensional axisymmetric nonlinear contact model was established for the sealing structure of the pressure-preserved controller. On this basis, the effects of different groove design, cone angle selection and friction coefficient on the sealing performance were analyzed by orthogonal test method. Meanwhile, the stress changes of the sealing ring under different closing stages and medium pressures were studied. The results show that: the pressure-preserved controller with 1.9 mm groove depth and 30° cone angle has the best sealing effect. The friction coefficient has little effect on the sealing performance, and it should be as small as possible according to the actual situation. The results of laboratory pressure test show that the pressure-preserved controller can form a seal under the action of a small preload, and its sealing performance remains stable with the increase of sealing pressure. The adaptive sealing characteristics ensure its sealing ability and working stability. The research results improve the sealing reliability of the pressure- and gas-preserved coring device in deep coal mines, which is of great engineering significance for the accurate determination of gas in deep coal mines.

Keywords

pressure-preserved controller, pressure-preserved coring, sealing performance, structural optimization

DOI

10.12363/issn.1001-1986.22.12.0961

Recommended Citation

WANG Tianyu, LI Jianan, ZHANG Yiwei, et al. (2023) "Sealing performance analysis and structure optimization of pressure-preserved controller for pressure-preserved coring in deep coal mine," Coal Geology & Exploration: Vol. 51: Iss. 8, Article 11.
DOI: 10.12363/issn.1001-1986.22.12.0961
Available at: https://cge.researchcommons.org/journal/vol51/iss8/11

Reference

[1] 谢和平,高峰,鞠杨. 深部岩体力学研究与探索[J]. 岩石力学与工程学报,2015,34(11):2161−2178.

XIE Heping,GAO Feng,JU Yang. Research and development of rock mechanics in deep ground engineering[J]. Chinese Journal of Rock Mechanics and Engineering,2015,34(11):2161−2178.

[2] 谢和平,钱鸣高,彭苏萍,等. 煤炭科学产能及发展战略初探[J]. 中国工程科学,2011,13(6):44−50.

XIE Heping,QIAN Minggao,PENG Suping,et al. Sustainable capacity of coal mining and its strategic plan[J]. Strategic Study of CAE,2011,13(6):44−50.

[3] GAO Mingzhong,ZHANG Zhilong,YIN Xiangang,et al. The location optimum and permeability−enhancing effect of a low–level shield rock roadway[J]. Rock Mechanics and Rock Engineering,2018,51(9):2935−2948.

[4] 崔洪庆,李德军,马宵. 基于瓦斯抽采钻孔的煤矿瓦斯地质精细勘查[J]. 煤田地质与勘探,2013,41(3):7−10.

CUI Hongqing,LI Dejun,MA Xiao. Meticulous gas geological exploration in coal mines on the basis of gas drainage boreholes[J]. Coal Geology & Exploration,2013,41(3):7−10.

[5] 胡千庭,邹银辉,文光才,等. 瓦斯含量法预测突出危险新技术[J]. 煤炭学报,2007,32(3):276−280.

HU Qianting,ZOU Yinhui,WEN Guangcai,et al. New technology of outburst danger prediction by gas content[J]. Journal of China Coal Society,2007,32(3):276−280.

[6] 张群,冯三利,杨锡禄. 试论我国煤层气的基本储层特点及开发策略[J]. 煤炭学报,2001,26(3):230−235.

ZHANG Qun,FENG Sanli,YANG Xilu. Basic reservoir characteristics and development strategy of coalbed methane resource in China[J]. Journal of China Coal Society,2001,26(3):230−235.

[7] 景兴鹏. 机械密闭取芯瓦斯含量测定集成技术研究[J]. 中国安全生产科学技术,2015,11(11):59−63.

JING Xingpeng. Study on integrate technique of mechanical sealed coring and methane content measuring[J]. Journal of Safety Science and Technology,2015,11(11):59−63.

[8] 孙四清,张群,郑凯歌,等. 地面井煤层气含量精准测试密闭取心技术及设备[J]. 煤炭学报,2020,45(7):2523−2530.

SUN Siqing,ZHANG Qun,ZHENG Kaige,et al. Technology and equipment of sealed coring for accurate determination of coalbed gas content in ground well[J]. Journal of China Coal Society,2020,45(7):2523−2530.

[9] 朱庆忠,苏雪峰,杨立文,等. GW–CP194–80M型煤层气双保压取心工具研制及现场试验[J]. 特种油气藏,2020,27(5):139−144.

ZHU Qingzhong,SU Xuefeng,YANG Liwen,et al. Development and field test of GW–CP194–80M CBM dual pressure coring tool[J]. Special Oil and Gas Reservoirs,2020,27(5):139−144.

[10] 谢和平,高明忠,张茹,等. 深部岩石原位“五保”取芯构想与研究进展[J]. 岩石力学与工程学报,2020,39(5):865−876.

XIE Heping,GAO Mingzhong,ZHANG Ru,et al. Study on concept and progress of in situ fidelity coring of deep rocks[J]. Chinese Journal of Rock Mechanics and Engineering,2020,39(5):865−876.

[11] 姚宁平,王毅,姚亚峰,等. 我国煤矿井下复杂地质条件下钻探技术与装备进展[J]. 煤田地质与勘探,2020,48(2):1−7.

YAO Ningping,WANG Yi,YAO Yafeng,et al. Progress of drilling technologies and equipments for complicated geological conditions in underground coal mines in China[J]. Coal Geology & Exploration,2020,48(2):1−7.

[12] 唐洋,舒将军,李旺,等. 深水测试防喷阀主密封副接触特性研究[J]. 润滑与密封,2020,45(6):61−68.

TANG Yang,SHU Jiangjun,LI Wang,et al. Research on main seal contact characteristic of deep water test blowout preventer valve[J]. Lubrication Engineering,2020,45(6):61−68.

[13] 王宇峰,何庆中,陈雪峰,等. 楔形双闸板闸阀密封失效与结构优化[J]. 油气储运,2019,38(6):709−715.

WANG Yufeng,HE Qingzhong,CHEN Xuefeng,et al. Sealing failure and structural optimization of wedge–shaped double gate valve[J]. Oil & Gas Storage and Transportation,2019,38(6):709−715.

[14] 杨刚. 超低温球阀主密封副性能研究及热力耦合分析[D]. 兰州：兰州理工大学，2017.

YANG Gang. Sealing performance research of cryogenic ball valve and thermal−mechanical coupled analysis[D]. Lanzhou：Lanzhou University of Technology，2017.

[15] 张希恒,周璟莹. 低温阀用聚三氟氯乙烯密封垫片的低温性能研究[J]. 化工机械,2017,44(5):497−501.

ZHANG Xiheng,ZHOU Jingying. Study on low temperature performance of ultra–low temperature valves with PCTFE gasket[J]. Chemical Engineering & Machinery,2017,44(5):497−501.

[16] 刘丽莉. 抗汽蚀双密封面阀门的研究[D]. 哈尔滨：哈尔滨工程大学，2013.

LIU Lili. The research on anti cavitation double plug valve[D]. Harbin：Harbin Engineering University，2013.

[17] SHI T，FU G Y，XU A Q，et al. Development of a Co−free，Ni−based alloy layer (Ni−SD) for sealing surfaces of nuclear−power valves cladding by hollow laser beam[J]. Materials Research Innovations，2015，19(Sup.1)：S1–83–S1–88.

[18] 高明忠,陈领,凡东,等. 深部煤矿原位保压保瓦斯取芯原理与技术探索[J]. 煤炭学报,2021,46(3):885−897.

GAO Mingzhong,CHEN Ling,FAN Dong,et al. Principle and technology of coring with in–situ pressure and gas maintaining in deep coal mine[J]. Journal of China Coal Society,2021,46(3):885−897.

[19] 陈晨,钱国庆,许兴彦,等. 基于ABAQUS的流体压力渗透O形圈密封性能仿真研究[J]. 液压气动与密封,2021,41(2):86−90.

CHEN Chen,QIAN Guoqing,XU Xingyan,et al. Simulation study on O–ring performance of fluid pressure penetration based on ABAQUS[J]. Hydraulics Pneumatics & Seals,2021,41(2):86−90.

[20] 王永乐,谢星,李香,等. 双浮动密封橡胶O形圈接触应力分析[J]. 润滑与密封,2022,47(7):183−188.

WANG Yongle,XIE Xing,LI Xiang,et al. Contact stress analysis of the rubber O−ring for double floating seal[J]. Lubrication Engineering,2022,47(7):183−188.